Mintek DVD-2580 DVD Player - Answered Questions & Fixed issues
We need the code to type in to control the power
Hi my nameis Mike Houston of DISH Network and I see you need the code for the Mintek DVDplayer. We currently do not have a code that goes to the DISH Network remote, wedo have what we call a Power Scan to program the DISH remote to the DVD player.I will send the link to help with these steps, http://www.dishnetwork.com/SupportSection/power-scan-instructions.
Reset password
Anonymous,
To do that, you can always go to mydish.com/mylocks. I just wanted to mention that for you or anyone else who may happen to stumble across this post from awhile ago.
NO d1 SC After Loading DVD What does it
It actually should be read as "No Disc", as in it does not recognize the DVD you have inserted. There are DVD+R & DVD-R Your recorder may only recognize one type.
I have no remote for
Check the Remotes4U website and purchase the correct remote for your machine. They are very likely to have it. If not, Search links will supply other suppliers.
Mintek DVD-2580 DVD parental control
I might have what you want. It is 88888 as set by the manufacturer. If you ever need the code for the remote control it should be 0717. I hope this helps.
The remote is lost,
Hello
Just buy one AT&T U verse remote control Mintek DVD is liste in its codes. You will get codes and proceedings with it in attached catelogue. Codes are:
2004, 2322, 2381, 2419
OK.
Will not load disc
say's no
Just to make sure that you are not playing a pirated DVD's, because there are some DVD players that won't play for pirates ones. But if you are playing an Original DVD's but still have the issue.
I would suggest to by a lens cleaner you can buy it to the nearest market in your town, I can guarantee that your DVD lens might be a little dirty.
Don't worry everything will be just fine after you buy a DVD cleaner.
Input password 2580 Mintek DVD player
Hi,
The default password for this unit is 8 8 8 8 8.
You should be able to input this number and reactivate the unit.
Thanks for using FixYa. Please remember to leave a vote for the solution.
How can i hook up my player to my tv with no rca
There are adaptors. I bought a Philips brand that allows any dvd player to be connected to any television. You connect the RCA cables to the Philips adaptor from the DVD player then you connect the Philips adaptor to the rf input of the television with a coaxial cable.
I have a mintek 2580 dvd player I just need an
Your model may or may not be hackable. It all depends upon which version of the model it is and which particular set of components the manufacturer (Shinsonic) chose to fit at the time.
MOST Mintek 2580's are effectively unhackable, but
click here to find out whether this applies to yours. Even if it is hackable, it's nowhere near as easy as on many other models and if you get it wrong your player will be permanently unusable.
Good luck!
HOW DO I GET MY PASSWORD OFF
You don't say what you have, but it looks like a DVD player from the picture. It should have a reset button in the back or bottom. Just like a modem router for your internet does. On them, if you lose your password and reset it, it goes back to the way it was from the factory.
Disc play interrupted
I recomend that you clean the lens to see if that makes a difference.
Also you might want to look at my Tip on dealing with DVD's that jump.
No disc...no answer
hi.
The spindle motor magnets have started to flake, causing the DVD's to
slip. like on a slip mat. You need to take the cover off and remove the
flaky magnetic particles on the magnets that clamp onto the DVD's. You
can put a very light coat of rubber cement on the lower magnet and let
it dry completely, this should give the lower magnet/spindle motor some
traction on the disc and get it spooling up in the correct amount of
time...
thank u
rate me
Not finding what you are looking for?