Will not load disc say's no disc - Mintek DVD-2580 DVD Player

There is a small hole on the front of the drive or on the actual loading door itself. Staighten out a Paperclip and stick it in the hole. Push and the loading tray will open. If you have the disc loaded wrong it may take a little "extra" push to open it up This works on all CD or DVD loading trays in your life

There's a Music Bank 7-disc player in use in my bedroom these days. Nice unit, but they used to come in for service once in a while- from what I could tell, these units don't 'park' the CD drawers on a soft power off- they simply shut down. When powered up again, they sometimes let the disc last in play slide off the tray & jam the machine. I've had no issues, as long as I always hit stop, wait for it to park, and then shut off. The analog output's sound has been very good (has a coax out as well).

see the next remedies:God bless you

1. No disc. - Load a disc into the tray.
2. Disc has been loaded upside down. Place the disc with the label side up.
3. Disc region code does not match region code of the player.
4. Disc type is not the correct type to play.
5. Disc is damaged or dirty. Clean the disc or try another.
6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours

Loading may mean it is not seeing the disc---A dirty or bad optical pickup is possible if you get this error with every disc.

Either a mechanism problem or a problem with the Optical unit inside (optical pickup) being dirty or bad.

Try a CD cleaning kit, if no change! the laser pickup assembly will need to be replaced, not cost effective to repair cheaper to replace.

This would indicate the laser pickup assembly is the problem, try a DVD cleaning kit and follow instructions, if no change, far cheaper to replace the stereo.

Hello!

There is really no better way than to remove the case cover and access the mechanical loading disc tray of your unit,

You will need to remove all screws to remove the case cover. Inspect the mechanical loading disc tray. There is usually a left disc not properly placed in the loading tray that causing the jam.
Check also if there is no broken teeth on the gear that drives the movement of the tray. You can lubricate it with oil or greese to help it move freely.

Hello
There are mainly three motors for most of the DVD players. One to spin the disc we insert in, other to load the laser pickup unit to-and-fro inside it to read the disc and an other one to load the tray mechanism 'in-out'. According to your description, the disc spins inside, and you can hear its spin. So motor which spins the disc has no trouble at all I should say. Then comes to the second motor that moves the laser assembly inside it. If it do not work, the laser pickup unit won't move and no reading will take place and 'No Disc' display will be the result. The last chance is with Laser Pickup Unit itself. Just get this unit repaired by any well experienced service technician or by the authorised service center, because, there are special tools to open this unit. As it is a compactable one, more care should be given to it while repairing. Suspect the second motor I described earlier, and the Laser Pickup Unit. OK.