20 Most Recent
Bose Acoustimass 10 III System - Page 3 Questions & Answers
I have a Bose Amas 10 III with 15pin input and 3
rca jacks by design separate possitive and negative. not sure what you are trying to do but make sure that you are not trying to hook up the bose speakers directly to your reciever, you will blow them.
Want a longer input cable for accoustimas 10 III
Take the existing cable to any Radio Shack store near you. They should be able to identify and supply the correct cable at that length, or an extension for it. Worst case, you can get the proper wire and connectors to make it yourself.
Need wiring assistance
Just need to register, login and you can download manual from
here.It will take only two minutes.
Hope this helps.
Subwoofer humming/buzzing
It sounds like one of the internal solder welds to the cable or a/v connections inside the cable box is bad.
Pyle P22-03ABTU stereo receiver.
Question edited for clarity. It is a 'Pyle' not a 'Pile'.
It is under warranty. Return it, an internal component has failed probably an electrolytic capacitor.
One thing you can try is to disconnect it and move it to another room to discount EMF from something.
..
Bose wave radio doesn't turn on with the remote but one time in 20 to30 times pushing the power button.
You can check with new battery in the remote. Next you point a digital camera, a smartphone should do fine, at the infra red transmitter on the front of the remote and then look on the camera screen if you see the ir light flash different pulses for each button. Infra red light can not be seen but a digital camera shows it really well. Confirm this with another remote. Now you know if the remote functions right. Remotes are available on-line or one can use a universal type remote. The IR receiver is often welded onto the circuit board. This means that it is not right behind the front panel window. It can be obstructed, perhaps by dust or displaced. This is generally speaking.
Not finding what you are looking for?