20 Most Recent Micro Innovations Wireless Optical Travel Mouse pd910p - Page 3 Questions & Answers

Install fresh batteries, turn it on and make sure your bluetooth dongle is installed and active. If you have never paired this mouse with it's receiver, then you will have to put them both into pairing mode, and once paired you should have no problems.

Is there a button on the receiver (the part that's plugged into the computer) also? If there is, press it shortly after pressing the one on your mouse and they should connect back together.

Your driver is here:

http://filebin.ca/csdcgy

I don't know how long it will stay active since I put it on a free hosting site. It is a verified Micro Innovations Driver.

Hope this helps.

Have you tried pairing them??? Press the button on the transceiver til the light flashes and then in turn press the mouse pair button followed by the keyboard pairing button. See if this fixes it
Hope this helps

Mark

dear,

check this spec.. it really require this battery...
http://www.compsource.com/pn/PD910P/Micro_Innovations_537/

goodluck.....

I am assuming that the mouse is USB...... place the usb into the system go to control panel and click on new hardware and follow the instructions from there the driver should be in the OS

There should be a tiny buttons on receiver and mouse that links them, you may need a pencil to press them, press button on receiver first then the one on underside of mouse

You need to have a Wireless USB adapter that came with the mouse. Plug it in to any one of the USB ports then it should work.

Normal 0 If the mouse doesn't have a little door to open on the bottom, then try this.
Just behind the Left and Right keys where your hand rests, apply firm pressure down on the cover and slide to the rear. Some mouse manufactures have used this type of access to replace the batteries.
Hope this helps. Bud

Normal 0 Try disconnecting the Mouse Receiver from the USB port and reinstall the CD software program. When the program asks you to connect the Mouse Receiver to the USB port, do so and it should work.
Hope this helps. Bud

here is a link of a pdf file manual of your mouse. pls. rate.ty

http://www.mic-innovations.com/files/PD5260LSR-QIG-Back59768_63.pdf

if the prob is within two weeks then do the system restore,take the computer to an earlier ti when the mouse was working fine...hope it will work...

I called the tech support number and they helped me....

here is the link you can down load it or just read it. https://www.gitbook.com/book/rediscagubath/ivso-bluetooth-keyboard-case-manual/details.

Go into the display options and brighten up the picture.

Download and install it will help you. http://www.iobit.com/en/driver-booster.php