20 Most Recent Yamata FY900 Mechanical Sewing Machine - Page 6 Questions & Answers

draw a diagram of the socket on the machine and go to a sewing machine shop, the lead is usually a model YDK

The needle thread breaks 1. the needle thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted 5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew 6. the threads were not drawn to the rear after sewing 7. The thread is either to heavy or to fine for the needlekeep longer thread tails before you begin to sew and make surethe thread tails are pulled behind the needle before you start sewing

The needle thread breaks 1. the needle thread is not threaded properly 2. The needle thread tension is to tight 3. The needle is bent or blunt 4. The needle is incorrectly inserted 5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew 6. the threads were not drawn to the rear after sewing 7. The thread is either to heavy or to fine for the needle

Dropped stitches are usually due to a bad needle. Check and replace the needle

try youtube for a video

HI, You can order the belt directly from Yamata. Here i have added the contact for Yamata. Yamata3450 NW 114th AvenueMiami, FL 33178-1840Phone: 305 418 4421 / Fax: 305-418-5036Toll Free: 1 888 2YAMATA (292 6282) / E-mail: [email protected] Ajin

" />

if the machine is still under warrenty, take it backif it's not under warrenty, take it to the place you bought it from & tell them

I won't promise you'll get one freecheck with these sites--you might have to email some of themsewingpartsonline.comsewusa.comsew4less.comsewvacdoctor.coma1sewingmachines.comsewingmanuals.com