20 Most Recent Minolta Di3510f Bizhub Copier - Page 7 Questions & Answers

REplace the toner cartridge with 3rd party or OEM?? Secondly replace the cyan image unit

Replace the drum and developer

Try this site for the service manual Service manuals electronic components datasheets and equipment schematics...

Did you replace the drum at the same time ?

The charge corona housing in the image unit replace it with a new one. Its the assy with the two blue/green hooks on the right side of the machine when you open the right side door

Is that a code EF????

Which model Bizhub

Sir/Mam, Replace the developer. If that does not work replace the ATDC sensor located under the image unit/developer section. The sensor has a multi-color ribbon cable attached to it. If not that then the main control board is bad. If you can find one!!! Best bet would be to replace the developer and ensure you clear the counters for the developer and run the required 36 Mode process after replacing the developer. DO NOT USE A VACUUM CLEANER to replace the developer because the static electricity from the vacuum cleaner can destroy the sensor. Also the copier uses the counters to adjust voltages for certain assemblies. So if you replace the developer and don't clear the counters then the machine will adjust voltages for a used drum or developer when in reality the developer or the drum are new. Causing image problems and codes.

Sir/Mam, Replace the developer. If that does not work replace the ATDC sensor located under the image unit/developer section. The sensor has a multi-color ribbon cable attached to it. If not that then the main control board is bad. If you can find one!!! Best bet would be to replace the developer and ensure you clear the counters for the developer and run the required F8 process after replacing the developer. DO NOT USE A VACCUM CLEANER to replace the developer because the static electricity from the vacuum cleaner can destroy the sensor. Also the copier uses the counters to adjust voltages for certain assemblies. So if you replace the developer and don't clear the counters then the machine will adjust voltages for a used drum or developer when in reality the developer or the drum are new. Causing image problems and codes.

Cooling fan for the Orginal glass. Check the fan for the big glass under the document feeder. Might be bad

Check that no paper is jammed in printer

User manual and service manual - free online. https://www.manualslib.com/products/Minolta-Di183-3109473.html Minolta Di183 Manuals

Utility-stop-0-0-stop-0-1 for service mode. choose clear data, then supply count then ok to clear. On/ Off the machine it will work as usual.

how to solve 4521 4522 in Konica 6501 6500 Konica Minolta 4522 4521 in...

sir/Mam Which draw are you using ? Try a different one or the bypass tray. The rollers need to be replaced Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Are you using third party toner???? replace the black toner with OEM Konicaminolta toner Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Do you have the RU section also? which is use between the finisher and the copier. Mite also want to have a tech come out and update the firmware the copier OS. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

mite want to have it cleaned. Have a tech look at it mite need to have the drum and developer replaced. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

set the paper bypass tray to the size of the check mite need to be customize measure the checks and tell the copier the size its x and y size A4 is same as letter size except its for the rest of world USA is letter and the rest is A4. A3 is 11x17. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hello,

It's possible to be warn developer (i need to know how many copies are developer) or image unit is leaking. If i see a paper printed by the copier, i can do more accurate answer. You can call a service center.