20 Most Recent Velbon Victory 550 Grounder Tripod with PH-156Q 3 Way Fluid Questions & Answers

Question edited for full 'make model (what it is)'. Question moved from Car Audio to a better category. My first tripod was a Velbon. When I started wedding photography, I bought a bigger one for a Bronica medium format camera. They don't really come with manuals, as they are pretty self explanatory. You can tighten them all down and undo one knob and see what moves. Tighten that and see what happens with the next knob. Basically though; You have 3 knobs or clips to extend the legs for height. You have one knob to raise and lower the central pole. Often this can be used as a monopod. Then you have the 'Fluid Head', with three adjustments; 1. Pan, this allows the head to move left and right. 2. Tilt, this is normally controlled by turning the stalk that you hold. 3. A knob to turn the camera base Landscape or Portrait. 4. Some have drag/friction knobs and various locks. There are empty promises of manuals in this link, but there is a video on the Velbon Fluid Head. Any questions, click COMMENT below this.

Suggest you try Velbon Website , Customer Service.

until it collapses There not rated in load capacity

Where can I get parts?

I got from friend a Velbon Victory 550 tripod. The handle that prevent the head from tilting is missing, and so is a piece of plastic that apparently held the rod upon which the head of the tripod is placed from shaking.

thank you

Try tripodquickrelease.com. They sell some repair parts for velbon tripods.

I don't know, can you read the Velbon manual ..... ?

If there is one available, download it from the manufacturers web site.

Tripod heads have standard thread sizes, 1/4" or 3/8" so you will have to check size. You can get an adapter if its different. Same brand should be same thread so you should be ok to change. You just have to try it to see.

I presume this is a tripod, although you have not stated. On good quality tripods, the head attached to the centre column with a screw thread, either 1/4" or 3/8". Grasp the centre column firmly, and rotate the existing head anti-clockwise, first checking to ensure there are no grub screws restricting its movement. When you have removed it, attach the replacement.

Is a manual or instruction leaflet really necessary ? Tripods are actually amazingly simple to use. You spread the three legs (three legs - 'tri'-pod) and place them firmly on level ground. Then you attach the camera, camcorder, spotting scope or whatever to the top, and use the equipment as desired.

Try your local hardware store for a match, or your local camera shop

Try Ebay or your local friendly camera dealer

Unless you have added an adjustable head to this monopod (in which case you need the QR plate appropriate to that head), it appears to feature only a standard 1/4" thread screw, which has in and of itself no QR capabilities. Please pass this info to your friend Anonymous.

Sorry but we have no parts resources of any kind here other than a Google search,

If your camera has a 1/4" thread socket on the baseplate, it can be fitted to the pan and tilt head in the illustration of this tripod provided by a Google search. The manual should give you definitive information if you are still not sure.