2005 Suzuki RM-Z 250 "oil" Questions

what oil should i use hey there i just picked up a 2004 rmz 250 just wondering if it takes 10w 30 motor oil like most bikes ? the dealer didn't help me at all with anyhting so just wondering what i ...

no oil being pumped to top of engine. rmz suzuki 2004 250,does this bike take 2 lots of oil,does it have oil in the kick start side and do you have to put some in were the gear peg is aswell, One oil ...

Water into oil after going through creek and lost all compression. What can I do? sounds like exhust valves rusted open or hung up.. pull head on cyclinder... drain crankcase oil put in fresh oil.. ...

...there are no signs of external leakage then it only has one other way to go, inside. If you have an oil dipstick, pull it out and check to see if your oil looks more like a milk shake sludge. Even if ...

...and she fired right up. problem is that she is filling up the flywheel housing completely full of oil and smoking out the exhaust. Valves are in perfect shape i promise, and timing is dead-on.Oil ...

...my 2 stroke rebiuld the top end it is low on compression 2 strokes are bad about that change the oil it may be full of petrol due to so much bad starting for a kick off (smell the oil, if it

i have a lot of oil blowing out the over flow tube it will blow all of it out its a new 04 rmz 250 sounds like you may have broken rings and it pressurised the sump and blowing the oil up the tube

i have 2005 suzki atv its blowing oil out the crankcase vent tube and filling my breather box up to much oil in crank case or possible rings gone

anyone know oil level in the 2005 rmz250 forks unscrew the black colored screw, install in the engine side of your bike,,, wipe it with a cloth, reinstall it,, start your bike, for 2 minutes,, unscrew

2004 rmz250 stuck in second gear after oil change after changing my oil in the bike i drove it and it got stuck in second gear and wont come out of second do not pull in on the clutch rock back n ...