Waterway Spa Pump Executive 56 Frame 4hp Single Speed 2 1/2" Intake 2" Discharge  "remove impeller" Questions

Ad

Question about Northern Tool Garden

1 Answer

remove impeller nylon impeller to be removed to check water flow problem How do you replace and remove impeller on outboard Honda 75 motor

Ad

...remove the impeller from. I can lock the shaft but the impeller will not turn off by hand. Is there a method or tool to assist in turning off the impeller? Are you holding the motor using the 'flats' ...

Ad

...remove the impeller, or the motor. Also removed the 4 long screws that come down from the wiring side of the motor, but still doesn't budge. What am I missing to take this apart? The impeller screws ...

impeller shaft broke at impeller. moytor started to make loud noise . removed end of pump to find impeller at bottom of housing. i have the wsame problem. A new pump will run me 550 I dont think I ...

remove the impeller from a Masport Onga HJ200 pump to access and replace the seal between the pump and the motor. The impeller is screwed on to the motor shaft; to remove it you need to hold the motor

remove accumulations of scale or calcium. Disassemble magnet from impeller by pulling them apart (it may take a strong pull). One end cap will come off. To clean the calcium scale off of the shaft and

Question about Pondmaster Garden

1 Answer

remove accumulations of scale or calcium. Disassemble magnet from impeller by pulling them apart (it may take a strong pull). One end cap will come off. To clean the calcium scale off of the shaft and

Question about Waterway Garden

2 Answers

...remove the impeller left or right thread Looking at the face of the pump, the impeller unscrews by turning it counterclockwise. Also, for some strange reason, the 4HP pump gets a 3HP impeller; the ...

...remove the impeller from the motor shaft? Thank you for posting your question here on Fixya.com. Lock the shaft using a wrench at the end where the electric leads connect. Then spin the impeller off ...

...remove the impeller from the motor shaft? If the shaft seal has been leaking the impeller stem may have split due to corrosion. This makes it very hard to un thread the impeller. After removing the ...

Not finding what you are looking for?
Waterway Spa Pump Executive 56 Frame 4hp Single Speed 2 1/2" Intake 2" Discharge  Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Waterway Garden Experts

john h

Level 3 Expert

29494 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39391 Answers

Are you a Waterway Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...