Cross Aurora 15 Sheet Cut Shredder - Stainless Steel "staples paper running reverse" Questions

Staples "Heavy-Duty Micro Cut" Paper Shredder, item # 633967, which I believe Fellowes manufactured for Staples. The blades have stopped turning - light is on, motor is running but blades will neither

staples xpl 200d shredder turns on and runs, but teeth are seized up, running in reverse wont fix it Paper is jammed in teeth. Have not had any problems with it and have used the lubricating teeth ...

...Staples brand) DS1-070528 V D 0386469. Barely a year old. The lights are on, power is good, runs in reverse, won't accept paper to shred. When turned on to run, it only makes a clicking noise. ...

...Staples store where you purchased it. It may be that the paper you are trying to use is too lightweight. Try inserting a piece of cardboard (SLOWLY SO AS NOT TO LET THE BLADES CATCH THE CARDBOARD - ...

...Staples SPL-TXC10A shredder won't stop running in the auto mode. It nearly stops but starts back up again as if I were putting more paper in but I'm not. I have to shut if off to get it to stop. I ...

...staples or clips in the shredder) even thou it says you can - this can cause a jam as well as not recognize paper. I recommend you get Shredder OIL to use 1 a month to keep your shedder in good ...

spl-txc122a shredding papers, then suddenly stopped. unplugged cleaned out, put in another outlet, still doesnt work. The motor runs reverse even when in Auto mode, how do I fix it, and why did it ...

...paper is shredded, to facilitate multiple shreds, without damaging the machine by turning the motor on and off during a multiple shredding job. This unit has heavy duty serrated shredder blades, ...

...is a photo sensor down where the paper in inserted.( this can get covered with fine paper dust) also see if it will run in reverse. this will test most of the motor and belts,gears. hope this ...

...paper past the sensor inside the paier slot, the yellow reverse light flickers on once, I hear a click like a safety relay and then nothing. The shredder does not run. Any suggestions? The box is ...