120v 15amp. I believe that it was made by Campbell Hausfeld and is of the oilless single cylinder type. If however your compressor is oil lubed and has a motor /drive belt configuration it may be able
Question about Air Tools & Compressors
...possible just for motor If the electric motor says 120/240 then yes. It it only says 120 on the data plate then no. I have attached a good read for you. Should you change your motor from 120V to ...
Question about Craftsman Air Tools & Compressors
...motor k56a28b23 230v work with 120v? Some motors will work with 120 volt or 240 volt You have to remove the small cover on the end of the motor & see if there is a diagram, where you move the ...
...120v i have a 30 gal 5 hp craftsman compressor that is 240 voltage. i have heard that it may be possile to change it over to 120 volt for usage. i can not locate a manual for it on line for the ...
switchable motor it would say so on the tag. I have an air compressor with a switchable motor and it says 120V/240V on the tag, theres a wire to remove inside the pressure switch to change the voltage
...120v, 15 amp, model 215902 VPK1381509 air compressor that either had no or someone removed, before I got it, the power cord. I cannot find anywhere to connect another one. The on/off pressure switch ...
Question about Goodyear Air Tools & Compressors
My goodyear direct drive inflator quit working, it turns on but no air comes out? It turns on but no air comes out. its probably a disposable product but there is a coupler between the motor and pump ...
Question about Ingersoll Air Tools & Compressors
...motor tag and see if it has 120v/230v. if not you will have to purchase a new motor that will handle 220/230 volts.If your motor will handle 220/230/volts you need to look at the the wiring diagram ...
Question about Alton Air Tools & Compressors
...motor is 1 phase,3hrspower,120v,induction. You may find a turnbuckle with that thread as they are all made in china now. That will get you the thread , then you will need to fashion something to take ...
Question about Hitachi Air Tools & Compressors
...120v wall outlet. Piston and shaft turn freely. Have installed a new pressure switch. Just turned the compressor on and spun the crank shaft and the compressor turned over sluggishly for a second and ...
188 questions posted
Usually answered in minutes!
35 Questions
1 Questions
1 Questions