2006 Toyota Tacoma "screwdriver iron" Questions

Ad

How do i remove a stuck oil filter that my oil filter wrench won't loosen? If you have the space, you can drive a large screwdriver into the filter and use it as a pry bar like a tire iron.

Ad

Question about Toyota Tacoma

3 Answers

...screwdriver under the sunglass case. This will enable it to unclip. Problem is with the 510 chip on the circuit board, it is a cold soldier joint. Touch it up with a soldiering iron. Then put it back ...

Ad

Question about Toyota Tacoma

7 Answers

...screwdriver, remove the three screws holding the circuit board to the console. Remove the lens from the circuit board and you should be able to see the 510 resistors. The one that came loose on mine ...

4. Mallet Hammer 5. Brake Spring Tool 6. Flat Head Screwdriver 7. Needle Nose Pliers 8. Tire Iron 9. Brake Resetting Gauge Supplies: 1. Brake Cleaner Hope this helped (remember comment and rated this)

...8000 miles ? rattle best found using a screwdriver as a stethoscope.discs are made of cast iron nowadays and get pitted/scored much more than they used to,so anything between 5k/30k is

...85 Chevy Suburban? Generally, if the hub cap does not have what appear to be lug nuts, there should be a **** big enough to put a flat head screwdriver or a tire iron into and just pry it gently

...screwdriver or Tire iron and find black cable going to release. Grab cable and yank on it! or get tire iron in mechanism and pry it open.  Is a steel cable inside this black sheath that needs to ...

Question about Toyota Tacoma

1 Answer

a screwdriver or tire iron and gently use it to pop the CV axles out of the trans. (tip: Use a little bit of grease or petroleum jelly to hold the lock ring in alignment while putting the axle back in

Question about Toyota Tacoma

1 Answer

screwdriver). then, turn the rod (usually by attaching the protruding end of the rod to a square hole in the middle of the tire iron, and using the tire iron as a handle) and the chain which holds the

Question about Toyota Tacoma

2 Answers

screwdriver. You'll need a simple soldering iron/pencil, 30Watt is plenty. Most auto parts stores and even wall-mart have these around $6-7. Soft cloth to place between dash plastic and screwdriver or

Not finding what you are looking for?
2006 Toyota Tacoma Logo

620 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...