2004 Hyundai Tiburon "1 crankshaft timing mark" Questions

...crankshaft pulley 22. Remove lower timing belt cover 23. Reverse steps 12 - 1 You can refer the videos below for further assistance.Your valuable feedback would be appreciated.Thanks for choosing ...

CRANKSHAFT SLOWLY 1/4 TURN ANTI CLOCKWISE. TURN CRANKSHAFT CLOCKWISE UNTIL TIMING MARKS ALIGNED. SLACKEN TENSIONER PULLEY BOLT. FIT TOOL TO TENSIONER PULLEY. APPLY CLOCKWISE TORQUE TO TENSIONER PULLEY

...1.Remove the alternator belt. 2.Remove the coolant pump pulley. 3.Remove the power steering belt and airconditioner belt. 4.Remove the crankshaft pulley. 5.Remove the timing belt cover. 6.Remove the ...

...crankshaft pulley so that the No. 1 piston is at top dead center 1.Disconnect the neagative terminal from the battery 2.Remove the engine cover. .Drain the engine coolant. Remove the radiator cap to ...

...1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft ...

...1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft ...

1]. 3. 4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3]. Remove: Crankshaft pulley bolt [4]. Crankshaft pulley [5]. Use tool No.09213-60017. 5. 6. Ensure

...1) Crankshaft Pulley (2) Cooling Fan Pulley (3) Tensioner (4) Generator (5) Air Conditioner Compressor (6) Power Steering Oil Pump (7) Drive Belt 5. Remove cooling fan assembly four nuts, then the ...

...crankshaft timing mark. When the No. 1 cylinder piston is at top dead center, the crankshaft timing mark should be on 0 deg. and the distributor rotor should be pointing to the number 1 terminal on ...

...timing marks are, dot on camshaft pulley and mark on cylinder head at approx 4 o'clock, crankshaft marks are dot on crankshaft pulley and dot on engine at approx 1 o'clock hpoe this helps Regards ...