Question about 2004 Hyundai Tiburon

2 Answers

I need instructions on replacing the timing belt

2004 Hyundai Tiburon 4 cyl.

Posted by hwcjpc on


2 Answers


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 69 Answers

1. Remove the Alternator Belt.
2. Remove the Water Pump Pulley
3. Remove the Air Conditioner Belt and Power Steering Belt.
4. Remove the Crankshaft Pulley.
5. Remove the timing belt cover
6. Remove the timing belt tensioner pulley.
7. Remove the Timing Belt.
8. (If Replacing) Remove Idler Pulley.
Installation is reverse of removal. Keep a close eye on the timing marks on the cam sprockets to make sure you don't knock anything out of whack.

I would strongly recommend replacing the water pump while you are replacing the timing belt. (The water pump usually comes in the timing belt kit.) Otherwise you are going to have to do this all over again when your water pump goes out. Good Luck.

Posted on May 27, 2009


Paul McGrath

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 776 Answers

Which engine? 4 cylinder or V6: Here's procedure for 4 cylinder:

DISASSEMBLY 1. Remove the alternator belt. 2. Remove the coolant pump pulley. 3. Remove the power steering belt and airconditioner belt. 4. Remove the crankshaft pulley. I need instructions on replacing the timing belt - kckd107a.gif 5. Remove the timing belt cover. kckI need instructions on replacing the timing belt - kckd109a.giflass= 6. kckd109a.gif note_icon_eng.gif If the timing belt is reused, make an arroI need instructions on replacing the timing belt - kckd109b.gif the turning direction (or the front of the engine) to make sure that the belt is reinstalled in the same direction as before. 7. Remove the timing belt. kckd109b.gif

Posted on May 31, 2009


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

When must I replace the timing belt

Most car companies recommend replacement on or before 80,000 miles. Both the 4 cyl and V6 engines are interference style which means the valves can be damaged if the belt breaks while the engine is running.

Jan 20, 2014 | 2004 Hyundai Tiburon

1 Answer

Hyundai tiburon belts or pulleys sqeaking

It will probably be a worn belt, examine belt for cracks and shiney spots.
You can buy a spary belt conditioner from the parts store but I would suggest replacement

Btw, I’m available to help over the phone in case u need at

Feb 18, 2012 | 2004 Hyundai Tiburon

1 Answer

Need instructions for t belt replace 2004 camry 4 cyl

Starting around 2003 toyota changed the design of their 4 cyls in the camry, they no longer use a timing belt, they use a chain that doesnt require you to change it like a belt.

Apr 29, 2010 | 2004 Toyota Camry

1 Answer

Does my 2004 hyundai tiburon have a timming belt or chain? when do i have to change it

Your car has a timing belt, and should be replaced at
60,000 miles. Hope this helps.

Mar 21, 2010 | 2004 Hyundai Tiburon

2 Answers

Timing belt

any where from 300 to 500

Nov 24, 2009 | 2004 Hyundai Elantra

1 Answer

How do you change the spark plugs on a 2005 hyundai tiburon

If v6 may need to remove intake manifold and applicable parts to gain acess to spark plug coils, remove coils and remove plugs install reverse order
If 4 cyl remaove cover on valve cover remove spark plug coils etc.

Oct 20, 2009 | 2004 Hyundai Tiburon

1 Answer

Need manual to change timing belt in 2003 tiburon - 6 cyl

Check with local junk yards or try on Ebay they have some manuals also.

Sep 24, 2009 | 2003 Hyundai Tiburon

1 Answer

Looking for step by step procedure to replace a clutch assembly in a 2004 hyundai tiburon with a 2.0 liter 4 cylinder engine ...

To do this job you will need a lot of time and above average skill level. You will need a good flat place to work, a good floor jack and a fixture to keep the engine from falling, and a pilot bar to align the clutch disc.. The actual instructions can be found in any decent manual...(chiltons, haynes etc) but art too long to re-write here. if you have any specific questions along the way post back and I'm sure someone will help out!!!
good luck!

Mar 25, 2009 | 2004 Hyundai Tiburon

Not finding what you are looking for?
2004 Hyundai Tiburon Logo

1,303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14850 Answers

Brad Brown

Level 3 Expert

18520 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides