2000 Hyundai Accent "speedo bulb" Questions

...actual clocks into the dash, then pull the clocks gently forward. on the rear are 2 plugs and the speedo connection, these will need disconnecting to completely remove the clocks. once removed on ...

...a loud vibration at the top of each gear, just before the gear change. a few months ago I had a new speedo fitted along with a couple of bulbs and the vibration stopped completely but has since ...

...1991 Toyota Previa Van How to replace dash light bulb of 1991 Toyota Previa van pop fuse cover, remove vent housing, remove speedo upper cover, remove 4 bolts holding speedo remove speedo, change ...

...release is situated) This will give you access to the bottom screws of the binacle around the speedo ( other screws up from underneath above the speedo) Once binacle removed you will see the ...

I KNEAD TO CHANG THE DASHBOARD/SPEEDO BULB HOW DO I GET TO THEM I KNEAD TO REPLACE THE SPEEDO BULB HOW DO I GET TO IT You must remove the entire instrument cluster to service the bulbs.

speedometer doesnt light up At night when i turn on my lights half of my speedometer doesnt light up The speedo is illuminated by small bulbs held in bayonet holders in the back of the speedo, they ...

...bulb to the speedo and tachometer, and of course replacing any blown bulbs with the same from a parts store. If using a new bulb does not work in the speedo/tach, look for a blown fuse in the fuse ...

...and enginge but it's much harder that way! Just kidding the dash is notthat hard to get out one speedo cable and four screws witll get the speedo head out so you can change the bulbs, they are ...

...bulb was for is the circuit on the speedo head at issue,you havent said what vehicle etc if it is pre 2000 this is proberly going to help you if POST 2000 then it may not as around then all ...

...speedo works but the lights are very dim compared to the service and inspection lights below. i have the panel light adjuster on high but it makes no difference. is this an expensive problem or could ...