Question about 2000 Hyundai Accent

1 Answer

Need to remove dashboard instrument panel to replace bulbs on a 2000 w reg hyundi accent

Posted by lindy_jackso on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 180 Answers

There are screws in the black plastic trim around the clocks, remove these and pull the trim forward. then remove the screws securing the actual clocks into the dash, then pull the clocks gently forward.
on the rear are 2 plugs and the speedo connection, these will need disconnecting to completely remove the clocks.
once removed on the rear of the clocks are the bulbs , easily removed by twisting the holders anti clockwise.

to re install, do the above in reverse..
:-)

Posted on Mar 25, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i replace instrument panel bulb


How to Replace an Instrument Panel Bulb - YouTube

? 14:56
https://www.youtube.com/watch?v=Rwj74yo2knY
Jun 15, 2013 - Uploaded by Schrodingers Box
Removal of an instrument panel cluster on 1996 Ford Ranger to... 1999 Ford Ranger: How to change dash board lights, walk through part 1 ...

How to Replace Dashboard Lights : Removing ... - YouTube

? 2:42
https://www.youtube.com/watch?v=zzxz7iG81kI
Sep 18, 2008 - Uploaded by expertvillage
Use socket wrench to loosen dashboard bolts. Learn about technique for installing dashboard lights in a 1996 Ford Explorerin this free auto repair series fr. ... do you need to remove the radio bezel to get to the clips?? will this ...

How to Replace Dashboard Lights : Removing ... - YouTube

? 2:30
https://www.youtube.com/watch?v=QJWoJ17liQI
Sep 18, 2008 - Uploaded by expertvillage


Dec 16, 2015 | 1996 Ford Explorer

1 Answer

Rpm backlight out


You must remove the cluter of gauges and replace the light bulb.
Instructions
    • 1Turn off the engine of the Taurus, and open the hood.
    • 2Remove the negative ("-") battery terminal from the battery in the engine compartment using a socket wrench.
    • 3.
      Insert a slotted screwdriver between the covers on the steering wheel column, and pry upwards. Pull off both the upper and the lower covers.
    • 4Position the steering wheel as low as it can go.
    • 5Remove the two screws above the Taurus' instrument panel and the four screws below it using a Phillips screwdriver.
    • 6Insert a slotted screwdriver into the dashboard trim, and pull upwards to pry it off the vehicle. Disengage the eight snap clips from the dashboard trim by hand, and pull it out of the vehicle.
    • 7Uninstall the two securing screws from the instrument panel with a Phillips screwdriver.
    • 8Pull the instrument panel towards you, and reach behind it to disconnect the two wiring plugs. Pull the instrument panel out of the Taurus.
    • 9Replace any burned-out bulbs from the underside of the instrument panel with new bulbs. Pull the old bulb off, and push the new bulb in.
    • 10Reassemble the instrument panel and dashboard trim in the reverse order of removal. Reconnect the battery, and close the hood.

Nov 06, 2012 | 2008 Ford Taurus X

1 Answer

Where do i check the auto transmission fluid on my r reg hyundi accent


If you look down the dipstick is very short and its right on the tranny almost even with it.

Jun 26, 2011 | 1997 Hyundai Accent

1 Answer

How do I remove dashboard to get to instrument panel to replace bulbs?


You will need a cross point screw driver

  • 1 Remove the two screws on the underside of the top of the trim panel surrounding the dash and instrument panel.
  • 2 Pull the trim piece off the dash.
  • 3 Remove the four screws that hold the instrument panel in the dashboard using a cross point screwdriver.
  • 4 Slide the dashboard instrument panel forward and disconnect the electrical connector from the back of the dashboard.
  • 5 Turn the instrument panel over.
  • 6 Turn the base of the dashboard light bulb counterclockwise to unlock it from the instrument panel and pull it out of the panel to remove it.
  • 7 Insert a new light bulb into the back of the panel, and turn the bulb clockwise to lock it into the panel.
  • 8 Plug the electrical connector back into the instrument panel and slide the panel back into the dashboard.
  • 9 Secure the panel with the factory mounting screws and replace the trim and trim-mounting screws using a screwdriver.
  • Nov 23, 2010 | 1999 Toyota Sienna

    1 Answer

    I need to replace the check engine bulb, it's burnt out and i've been told i have to remove the dashboard. How hard is that?


    you do not need to remove the dash, just the instrument cluster, to do this, remove the bolt in the hood latch, then the bolt on the other side of the steering column cover panel, then the panel will pop out, this will uncover two screws on the instrument cluster finish panel, remove these two screws, and the three pointing upwards in front of your gauge cluster, this panel will then come out, disconnect battery, remove the four screws and the instrument panel will come out, unlpug it, check to see which bulb is the service light, and replace!

    Oct 23, 2009 | 1997 Ford Escort

    1 Answer

    NO LIGHT DO NOT SEE TIME


    You don't say which vehicle it is or whether the clock is built into the dashboard or is included on the instrument panel. (a) If it's built into the dashboard separately from the instrument panel, you need to remove the clock from the dashboard surround (it may just be a push-fit so if you can see the outer edges of the clock module try GENTLY using a small flat blade to ease the clock out of its receptacle). Once removed from the dashboard, disconnect the wiring plug, then look for a small bulb unit in the back of the clock module. Replace the bulb with a new one, reconnect the wiring connector and test that the clock lights up when the ignition is switched on before re-inserting the module back into its original location on the dashboard. (b) if the clock is part of the instrument panel, you will need to remove the instrument panel in order to get access to the relevant bulb (which will probably be on the rear of the instrument cluster directly adjacent to the location of the clock).

    Jul 08, 2009 | 2003 Subaru Forester

    1 Answer

    Replace the dashboard lights on the of c200 mercedes 1994


    You need to remove the instrument panel and replace the blown bulbs.
    Remove the steering wheel and lower facia panel and then reach up behind the instrument panel and push it out of the facia.
    NB. Disconnnect the battery and wait for 15 mins. before removing airbag from steering wheel.
    Torque setting for steering wheel nut is 80 Nm or 59 lb f

    Mar 30, 2009 | 1997 Mercedes-Benz C-Class

    2 Answers

    Brake Bulb


    You should be able to get to the bulb from the trunk.

    Aug 12, 2008 | 2000 Hyundai Accent

    2 Answers

    Replacing dashboard lights on an 2000 Oldsmobile Silhouette Van?


    the light bulbs are not replacable unless you can solder, you have to replace the complete instrument cluster, get one from a junk yard 100 bucks.

    Jul 24, 2008 | 2000 Oldsmobile Silhouette

    Not finding what you are looking for?
    2000 Hyundai Accent Logo

    Related Topics:

    333 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    Marvin
    Marvin

    Level 3 Expert

    85239 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22485 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8984 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...