2004 Hyundai XG350 "1 crankshaft timing mark" Questions

Ad

...1?2 turns and tighten the timing belt to a tension of 57?84 lbs. (260?380 N). Turn the crankshaft two turns clockwise. Readjust the sprocket timing marks and tighten the tensioner bolts. Install the ...

Ad

...1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft ...

Ad

...1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft ...

1]. 3. 4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3]. Remove: Crankshaft pulley bolt [4]. Crankshaft pulley [5]. Use tool No.09213-60017. 5. 6. Ensure

...1) Crankshaft Pulley (2) Cooling Fan Pulley (3) Tensioner (4) Generator (5) Air Conditioner Compressor (6) Power Steering Oil Pump (7) Drive Belt 5. Remove cooling fan assembly four nuts, then the ...

Question about Hyundai XG350

1 Answer

...crankshaft timing mark. When the No. 1 cylinder piston is at top dead center, the crankshaft timing mark should be on 0 deg. and the distributor rotor should be pointing to the number 1 terminal on ...

...timing marks are, dot on camshaft pulley and mark on cylinder head at approx 4 o'clock, crankshaft marks are dot on crankshaft pulley and dot on engine at approx 1 o'clock hpoe this helps Regards ...

Question about Hyundai XG350

1 Answer

...1-30 ft-lbs (40 Nm) Step 2-tighten an additional 90 degrees Position the crankshaft keyway in the 11 o'clock position. Lubricate and install all camshaft roller followers. WARNING Engine front cover ...

Question about Hyundai XG350

1 Answer

...crankshaft timing marks are aligned to TDC of the compression stroke of the No. 1 cylinder, the distributor rotor is pointing to the index mark on the upper lip of the distributor housing which ...

...1/ rotate the crankshaft pulley using a socket wrench and power handle and check if the piston on your cylinder no. 1 reach the top center that is TDC/ remove timing belt cover and locate a ...

Not finding what you are looking for?
2004 Hyundai XG350 Logo

409 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...