Question about 2004 Hyundai XG350

2 Answers

I need 2004 Hyundai XG350L Service/repair Manual

I need 2004 Hyundai XG350 Service/Repair Manual that covers Timing belt replacement

Posted by mcghanclan on

Ad

2 Answers

Greg Bernett

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 2,989 Answers

3.5L Engine

Remove or disconnect the following:

  1. Negative battery cable
  • Engine coolant
  • Water pump pulley bolts
  • Alternator bolt, loosen only
  • Water pump pulley and drive belts
  • Crankshaft pulley
  • Timing belt cover(s)
  1. Turn the crankshaft until the timing marks on the camshaft sprocket and cylinder head are aligned.
  2. Loosen the timing belt tensioner bolt and turn the tensioner counterclockwise as far as it will go. Tighten the adjusting bolt.
  3. Mark the timing belt with an arrow showing direction of rotation.
  4. Remove the timing belt.
  5. If defective, remove the timing belt tensioner.

I need 2004 Hyundai XG350L Service/repair Manual - 9767b45.gif
Timing belt sprocket alignment mark positioning for belt removal and installation—3.5L engine

To install:
  1. If necessary, install the timing belt tensioner.
  2. Attach the top of the tensioner spring on the engine coolant pump pin. Ensure the hook on the pin is facing down and the hook on the tensioner is facing away from the engine
  3. Rotate the timing belt tensioner to the extreme counterclockwise position. Temporarily lock the tensioner in place.
  4. Align the timing marks of the camshaft and crankshaft sprockets.
  5. Install the timing belt on the crankshaft sprocket, then onto the rear camshaft sprocket.
  6. Route the belt to the coolant pump pulley, the front camshaft sprocket and the timing belt tensioner.
  7. Apply force counterclockwise to the rear camshaft sprocket with tension on the tight side of the belt and check that timing marks are aligned.
  8. Loosen the tensioner bolt 1–2 turns and tighten the timing belt to a tension of 57–84 lbs. (260–380 N).
  9. Turn the crankshaft two turns clockwise.
  10. Readjust the sprocket timing marks and tighten the tensioner bolts.
  11. Install the timing belt covers.
  12. Install the crankshaft pulley and tighten to 108–116 ft. lbs. (150–160 Nm).
  13. Install or connect the following:
    • Timing belt cover(s)
    • Crankshaft pulley
    • A/C compressor belt
    • Water pump pulley
    • V belt
    • Negative battery cable
    • Engine with coolant

Posted on Feb 10, 2010

Ad

Gummy D Milo

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 265 Answers

Https://www.hyundaitechinfo.com/

Posted on Mar 06, 2013

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 hyundai xg350 camshaft position sensor location


Its located on the left side of the engine, (passenger side). Take the timing chain cover off, look for a wire just in front of two pullies, closest to you. One maybe two bolts, its probably caked with metal debri, being that it's a magnet which reads gaps in a thin disk. This gap tells the engine when to fire whatever cylinder. My sensor went bad after 3 days from purchasing the vehicle from a dealership, they wouldn't help me since there was no warranty. Pos. The engine shook so hard I thought it was going to break a motor mount, after a day it was underivable. Contact me for a diagram if needed. Hyundai xg350L 2004 3.5L repair shop manual. [email protected]

Mar 03, 2017 | 2004 Hyundai XG350

1 Answer

TIMING MARKS ON 2003 HYUNDAI XG350L


Follow the link to the timing belt diagrams, all of the needed info is there, scroll past the serpentine belt diagras, T belt is lower down on the page. https://www.2carpros.com/diagrams/hyundai/xg350/2003

Oct 17, 2016 | Hyundai Cars & Trucks

1 Answer

2004 Hyundai xg350. Wipers quit working. What steps do i take to see if its a motor or fuse etc.?


Search Results

    02 XG350 air, sunroof, seat warmers, and intermittent wipers quit ...

    www.hyundai-forums.com/.../149142-02-xg350-air-sunroof-seat-warme...

    Sep 27, 2012 - 9 posts - ‎5 authors
    An automotive shop pulled up the car and said their was a fuse box with a lot of relays in it on the passenger compartment .... 2004 XG350L .... Same thing happened to me, 2002 XG350, sunroof, blower, vanity light all out.

    Hyundai XG350 wipers not working Questions & Answers ...

    www.fixya.com > ... > wipers not working > Cars & Trucks > Hyundai
    Hyundai XG350 cars & trucks wipers not working questions and answers. Ask your Hyundai wipers not working related question. ... 2004 Hyundai XG350.

    Hyundai wipers not working Questions & Answers - Fixya

Dec 03, 2015 | Hyundai Cars & Trucks

1 Answer

I have a 2004 xg350l that is making a whining noise that my mechnic said was the power steering pump. I had the timing belt, serpentine P/S belt all replaced. Do you have any repair info on removing and...


I do have repair info, also remove and replacement advice....however, i would advise that you get this done at a shop, as the r and r is pretty staright forward but the "bleeding" of the system is fairly extensive and not advisable for the home mechanic !!!

Mar 28, 2011 | 2004 Hyundai XG350

1 Answer

I replaced my timing belt at 60k, my car now has


I assume that you replaced the belt at 60,000 because that was the recommendation in the owner's manual. It needs to be done every 60,000 to keep the engine running fine so you should be giving serious thought to getting it done soon. Hope this helps.

Apr 17, 2010 | 2004 Hyundai XG350

2 Answers

Xg350 2004 misses when engine switches from set warm up stage to computer maintenance, also between 40-50 mph. Fuel pump ok, all ignition parts replaced, timing belt new, air flow sensor cleaned. Could...


I read of a similar problem and the person had the chip in the computer replaced. That was causing the miss in his 2004. He was from Florida and a mechanic in an AAmco found the problem

Feb 20, 2010 | 2004 Hyundai XG350

2 Answers

Is the motor in an xg350l an interference engine?


Yes, the 3500 V6 in the XG350 is an interference engine by design. Severe engine damage can occur if valve timing becomes incorrect due to timing belt failure.

Feb 09, 2010 | 2004 Hyundai XG350

1 Answer

Are there any warning signs of a timing belt going? i.e., engine noise


Unfortunately not. Hyundai recommends a timeing belt every 60K mi. I beleave. Check the owners manual schd. maintainance.
I CAN tell you if the belt breaks at hyway speed, you'll most likely have a trashed head and a LARGE repair bill.

Dec 23, 2009 | 2004 Hyundai XG350

Not finding what you are looking for?
2004 Hyundai XG350 Logo

3,634 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Brad Brown

Level 3 Expert

18562 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...