2001 Hyundai Tiburon "replace wheel bearings" Questions

...replace the front wheel bearings on a 2003 Tiburon the front wheel bearings on your car are not sold except as a front wheel hub assembly with the bearing pre-installed, they run about $100.00 each, ...

...WHEEL AND BRAKES OFF, THERE IS THREE BOLTS THAT THE HUB AS CONNECT IT TO THE CAR, AND ONE BIG AXLE NUT IN THE CENTER OF THE ROTOR.. THE ALL THE BOLTS OFF SLIDE YOUR AXLE OUT AND JUST REPLACE YOUR HUB ...

need direction on replacing the front hub assembly on the front passenger side It's a press-in bearing. If you don't have the tools to press the bearing, you can still save some money. Here's what I ...

...when pressing the old wheel bearing out / new one in. In that case, the sensor would have to be replaced

replace front rotors. Rotor and hub install is ez after you get bearing pressed.Rear rotor and bearing are bolt on though. if there are 2 threaded holes on the face of ther rotors near the wheel studs

...wheel bearing is going out, the car makes a loudsound while driving especially the faster you go but whats starnge is that when i turn fairly hard to the left the sound dissapears ,it used to be when ...

my front right side has a grinding noise when driving with out step on the brakes Most likely a wheel bearing hub assy Rock Auto.com --- for parts -- if your replacing yourself

replacing front wheel bearing, which way does the nut rotate off. Normal thread. Counterclockwise. The nut is **VERY** tight. Here's what I do: Before removing the brakes, get someone to stand on the ...

...wheel bearing on a 97 hyundai elantra The front 'hub' bearing is 'pressed' out. You have to remove the steering knuckle from the vehicle and using a hydraulic press, replace the bearing by pressing ...

...replace my front wheel bearring on 2001 Tiburon,can I get diagrams for this on line ?? Or IS THERE A REPAIR MANUAL ANYWHERE for my 2001 Tiburon ?? PLEASE help !!! Yes autozone.com has a repair guide ...