...Lambda Control (B2) P1168 O2s (B1/S2) Heater Power P1169 O2s (B2/S2) Heater Power P1170 ECM (Barometric Pressure Sensor) P1171 ETS Valve Stuck - Open P1172 ETS Improper Motor Current P1173 ETS Target ...
...Lambda Sensor Post Cat Bank 2 Signal29A1 Lambda Sensor Post Cat Bank 2 Signal29A2 Lambda Sensor Pre Cat Bank 2 Signal29A3 Lambda Sensor Pre Cat Bank 2 Signal29A4 Lambda Sensor Heater Pre Cat Bank 1 ...
...Lambda Sensor Post Cat Bank 2 Signal 29A1 Lambda Sensor Post Cat Bank 2 Signal 29A2 Lambda Sensor Pre Cat Bank 2 Signal 29A3 Lambda Sensor Pre Cat Bank 2 Signal 29A4 Lambda Sensor Heater Pre Cat Bank ...
...lambda sensors first now he is referring to a knox sensor. I have changed all four coil packs and plugs due to previous faults and the car was ok for 3 weeks, I now have the above faults but the car ...
...lambda sensor problem they are not cheap have had to replace all 4 in the past. over 1000pounds genuine jaguar that is. pattern ones are not good..so make sure to get it checked properly. hope this ...
...sensor faulty 2-3-1 and 2-3-2 lambda adjustment. I have no idea what a lambda adjustment is. 1-2-2 means the sensor in the air inlet duct is disconnected or open. 2-3-1 and 2-3-2 means your o2 sensor ...
Question about Hyundai Tucson
...Lambda Sensor Heater -Bank 1 • 27 Idle Control Valve - Malfunction • 29 Ignition Coil Cyl 1 • 30 Ignition Coil Cyl 3 • 31 Ignition Coil Cyl 5 • 33 Fuel Injector Cyl 5 • 35 Aux. Air Injection System ...
Question about Hyundai Cars & Trucks
...I need to smog but cannot do so until this is resolved. Please help Please read about this fault code and its possible sources. P1167 Hyundai O2 Sensor System Lambda Controller at the Limit Bank ...
...the lambda probes on that vehicle, you really need to see which one is not oprating 1st, and make sure wiring is ok to that sensor 1st before just going to buy a new lambda probe Hope this helps ...
Question about Hyundai Tucson
lambda probe heater circuit. This will need a new sensor if the wiring tests good. If the fault still returns, then replace the engine ecu. ( some control units did have a software update to fix this,
874 questions posted
Usually answered in minutes!
610 Questions
117 Questions
101 Questions
76 Questions
67 Questions
