20 Most Recent 2006 Hyundai Tucson Questions & Answers

It is here and note they are INCH pounds not ft lbs. https://www.google.com/search?q=2006+Hyundai+Tucson+V6+torque+specs+for+valve+cover

Valve Cover Bolts Torque Spec

Hyundai Forums https://www.hyundai-forums.com > threads > valve-cov... Jun 6, 2016 - If the specs are 72 - 84 inch pounds, i always use the lowest value, especially in aluminum. If you use a new gasket and clean the mating ... Replacing Valve Cover Gasket - Hyundai Forums Dec 9, 2007 Valve Cover Replacement Specifications - Hyundai Forums Aug 24, 2012 torque specs ' Hyundai Forums May 11, 2015 Valve Cover Torque ' Hyundai Forums May 21, 2023 More results from www.hyundai-forums.com ..

Replace? It has to want to change, lol hyundai it is, it leaks coolant or core just water blocked, we blow it out with shop air, if clogged inside or if the blend door is stuck closed you are barking up the wrong tree for SURE. the service manual covers that. or do google videos????????? and is not the same with manual HVAC and climate controls option the latter can be way more complex and big. most cars is dash out, not all just most. modern cars dash is way way way too full of JUNK ! toys, and endless stuff. and air bags. do not work around STS bags until disabled. some videos show hacks, do yah? how many hours labor? really that is it no? my shop manual shows 39 steps. all is drained coolant and R134 so 80 steps out and in. 10hours hard labor and a ton of stuff fails at the end shops charge $1500 to $2000 for this job. steering wheel must be align marked first. or even way more work https://eautorepair.net/Marketing/Default.asp

It is important to always use washer fluid designed for cold weather. Even if you refill in warm months use the washer fluid with the antifreeze protection since you may not use the rear window cleaner enough to flush out all of the summer washer fluid.

They are usually on the rear of engine, (between the engine and the driver). They will be tucked about half way down near the exhaust manifold. A small nut holds the wire in place. They will probably be a pain in the **** to get to.

that would be - in the engine.

Replace starter. Or cables ........................

mirandamcl,

I just took my 2006 Tucson in to have this fixed. It was simply that that hose from the air filter was not clamped on tight. That was 2 days ago, no more problem.

It's probably loosing its fuel prime.

https://www.youtube.com/watch?v=ZzSVrP8ioAU

When it starts to act up, take off the fuel cap and see what happens. Check the computer to see if there are any codes. Possible weak fuel pump. Check pressure with a gauge. Check fuel filter. Squeak noises are common. Look for the area the noise comes from and isolate the squeak.

Hi there's this website something like reliable-store and it is very amazing for manual for repairing servicing anything someone on fixya recommended it to me and I thank him even today

Are the battery cables tighly fit to the battery posts? And do they fit snugly? Mine kept coming shaking loose when I drove and when I parked the car for a while, dead battery when I came out. The cables that connect to the battery posts did not fit well.

call the company they know better then everyone else and they are free as well

Lubricants and capacities
Engine oil options
Ambient temperature range Cold climate
Engine oil grade SAE 5W/30
Engine oil classification API/ACEA SJ/A2
Ambient temperature range Moderate climate
Engine oil grade SAE 10W/30
Engine oil classification API/ACEA SJ/A2
Ambient temperature range Moderate climate alternative
Engine oil grade SAE 10W/50
Engine oil classification API/ACEA SJ/A2
Ambient temperature range Hot climate
Engine oil grade SAE 10W/40
Engine oil classification API/ACEA SJ/A2
Engine with filter(s) litres 4,5

yes all diesels have some form of heating instruement to help raise the compression temp to a point that atomized fuel self ignites

Fix your car right away by clicking the link I attached 2006 HYUNDAI TUCSON SERVICE REPAIR MANUAL DOWNLOAD