1984 Oldsmobile Delta 88 "spindel" Questions

wheel spindel wheel spindle axle

1990 front wheel spindel The front pass. side wheel bearings went out and I can't get to them,I took nut off spindel and used a puller but it want come off spindel. (I'm refering to the peice the tire

...u-joint cover, it is a cv joint. if this is a chevy. you will have to pull the cv shaft out of the spindel. first loosen the outter tierod nut on the spindel, do not take off completely but just so ...

...more than I have to. Thanks, Mike I removed the rear control arm from the frame not at the spindel, not enough room to use a ball joint press at the spindel/knuckle!! This gave me enough

...the wheel studs on the front passenger side of a 1995 ford escort lx normally you can take off the spindel but if you remove brake disk and back plate you should be able to punch out the studs with ...

I have a 84 f250 and I need to change the u joint I have the hub apart down to the spindel, I took the nuts of the studs and couldn't get it, so I took the studs out and still can not get it to ...

...in on my 2001 volkswagen beetle it makes a grinding sound and will not move forward or in reverse. spindel bearing might be shot in the gearbox usualy can hear noise when putting clutch in dont ...

i can not get the nut off hub spindel try to find a large socket

how do you mount a tie rod on a pt cruser does it mount from the bottom or from the top of the spindel arm look for the (taper),,is on top or bottom,,on the spindle arm,,

...1-2 bolt holdes pushing it off as I have read on mutiple sites. i think you have to get the hole spindel for ...