Frigidaire GLTF2940ES Front Load Washer "fix dryer tub cracked" Questions

...dryer (WSM2700) - it worked great until we moved it. Now it spins but won't drain completely and there is a crack in the platic tub. Is it worth fixing, or should we just give up? Most plastics don't ...

...be water pump, sometimes the seam seperates and causes leaking during wash cycle. Its a pretty easy ...

...dryer fixed - now this!! These units are only 3 years old. HELP Hi. This is a System leak code. If after 30 seconds the control does not detect water entering machine, the valves will be turned off ...

fix it? How do I get the unit open? Thank you for any assistance you can give. Two screws on the very bottom, remove them and take something flat and insert it in the crack where the washer top is and

...dryer stack set from Frigidaire and it started leaking after 3 years.It was a small amount of water at first so I thought not big deal..then it got bigger.. I had a repairman come in and the tub was ...

...dryer had some lint catch fire and melt it.) After I replaced it, the tub fills up, goes into the wash cycle, drains then goes into the rinse cycle and then starts to refill the tub again and that is ...

...dryer. Clothes were spun OK, no problem with any water in the tub. The water supply hoses were tight and dry. The gray plastic drain hose was wet when feeling it about halfway up to the drain outlet. ...

...cracked inlet nozzle can leak during fill. The leaking water will drip down the outside of the tub and collect under the unit. Be sure that the hose connected to the inlet nozzle is tightly clamped. ...

...dryer if u checked the pressure switch aand its ok then look at your water inlet valve? Washer fills with water and overflows: The water pressure level switch is a pressure activated switch that is ...

...dryer comb - the washer water level will not shut off This advice is for a washer that fills and will not shut off, resulting in an overflow. Or, water is leaking from the washer while filling. The ...