Radio Shack 250 Watt PA Amplifier Amplifier "protect mode" Questions

...protect mode Yeah, I assume it is an older one. The reason it goes into protect mode is 1. Shorted output channel and it is trying to protect itself and your speakers. you need a repair guy. 2. ...

...protect mode my teac amplifier has gone into protect mode wat do i need to do to get it out of protect mode can u reset it or do i need to buy a new part There is a problem with one or both of the ...

...mode you are speaking of, is called DC Protection. It means that either of the amplifiers have DC voltage on the output, which will either turn off the speaker relay, or power supply relay, disabling ...

...speaker wiring or problems. It sounds to me like IC502 might well be the cause, or perhaps a faulty relay if it uses one. But IC's are often to blame, this one might even control the protect

...protect mode my amp keeps going into protect mode and i dont want to send it away for another month if you could help me that would be great Most time they go to protect there is something shorted in ...

unit is in protection mode plugged in my pioneer today for the first time and the light on the unit is flashing red. owners manual says it is in protection mode yet I can not seem to get it out of ...

...protect mode i have unpluged all the speekers thinking that there might be a short in the wires but it still keeps going into protect mode when i turn it on and there is nothing at all pluged into it ...

...protect mode. If the wires were crossed (in other words shorted), that would. Disconnect all speaker wires, if the unit is still in protect mode, than the output transistors are probably shorted and ...

Mode. What should I do ? Thanks & Regards **** The power supply is damaged and needs to be serviced. You have done exactly what you should have to test for an outside issue, it's the receiver. The