GE XL1800 1100 Watts Microwave Oven "replace motor xl 1800" Questions

replace the turntable motor. I used a local appliance repair shop and they charged $45 for the motor plus $65 labor(a house call). I just checked with searspartsdirect.com and they have the motor(part

...motor. You can replace it yourself, as long as you have an offset phillip's head screwdriver handy. Before you order the replacement part, figure out if your stirrer is driven by a d-shaped or a ...

...XL 1800 MW recirc motor open and closes flap on its own every 10 secs. GE XL 1800 MW recirc motor startes and opens and closes flap on its own every 10 secs. I've unplugged it to try and reset but it ...

...when you hit start, the turning motor sound was never there before. Any info or help would be greatly appreciated! Thank You Jim that sound comes from fan motor, please replace or service fan motor

...motor and replacing a fuse or two. Thoughts? How do I access fuse? Worth repairing? If it was run without the fan a thermal protect device was more than likely taken out. Check for that and replace ...

...one but the hi med and low are extremely slow. Low is almost not even on. Is there any way to increase the speed digitaly since this micro is all programable? You likely need to replace the fan

...XL 1800 and both of them stop shooting microwaves after about 2 years. Everything else works fine. I'm thinkings it's the magnatron. Can I test the HV on this? Would hate to spend $$ on the magnatron ...

...motor or plastic coupler. To replace either, you need to unplug power, then remove the bottom cover of the oven. You may have to cut the cover off with snips, then use a screw when reassembling it. ...

...XL 1800 microwave is making noise on the top end. It's not the turntable. There is a round disk at the top inside that has OPEN CLOSE markings. It seems to be held by a little button which won't push ...

...XL 1800 Turntable malfunction? We have an over the range model manufactured in 2001. In the last 2 months, the turntable seems to be breaking down. It makes quite a bit of noise while attempting to ...