...fine. I can hear the AC Relay Board, inside the trailer, click when switching from Cool/Off & Off/Cool. Any ideas? Thanks. Just clicking is all your getting from ceiling assembly? No other modes ...
Question about Haier Heating & Cooling
...AC RUNS FINE, I ALSO CHECKED THE VOLTAGE DURING THIS PROBLEM THE THE VOLTAGE WAS FINE TOO!! AND ALL THE OTHER APPLIANCES E.G. REFRIGRATOR AND TV WORKS FINE IN MY HOUSE ACCEPT FOR THIS APLIT AC UNIT, ...
AC was cooling fine. Now, won't cool room even though cool air comes out. Exhaust hose is extremely hot. Check filter, if you have a 5000BTU unit (small) and it is extremely hot, then it wont work ...
...AC is not cooling. Fan runs continuously. Coil line leading out is frosty. It probably is clogged with dust and lint. Vacuum out after it has had a long while to dry out. Clean evaporator with fine ...
Question about Heating & Cooling
...cool. Sometimes it starts up perfectly fine. Whirlpool AC showing error code F2 F2 ---for me its a sensor problem had it done thanks katsarasUnit -- Whirpool AC Model no. Wasr18k20 1.5 ton split ...
Question about Dometic Heating & Cooling
...ac doesn't cool. Fan runs fine, no COOL air. With thermostat in off position. Checking the voltages I found 118v at the breaker. At the run relay, 118v going in and a coupl My Dometic roof top ac ...
...ac puts out 5 minutes of cool air, then the regular comes out for about 10 minutes, then the cool air again for 5 minutes, etc. Last year it was working fine, continual cool air, this year not. I ...
Question about Haier Heating & Cooling
...cools down the room but not as cold as it used to. Help? Sounds like the unit is just dirty. The AC pulls air through coils and contains dirt, pollen, grease and all type of pollutants. These ...
...AC. It runs fine but We have a Goldstar GP120CE portable AC. It runs fine but doesn't cool. The compressor sounds like it cuts in but does not seem to cool the air? The exhaust duct is not hot as it ...
...ac ran fine. Cooled great until about 9 pm. Check unit in the morning and found contact switch would not remain engaged. When contact was pushed manually, unit ran fine. Picked up new contact, ...
2,853 questions posted
Usually answered in minutes!
95 Questions
12 Questions
