Maytag Legacy Series Top Load Washer "grinding noise burning" Questions

Grinding noise,unit stopped, burning smell? Washer started making grinding noises, unit stopped completely, burning smell. broken or slipping drive belt, motor to spin pulley defective drive clutch, ...

...grinding noise starts and a burning smell develops if I let it spin on then smoke comes out could be your motor coupling, clutch or brake linings. if it smells like rubber burning then it is your ...

...grinding noise. Then I smelt something burning. I took off the the top of the machine and checked all wiring it seemed to be intact. With the top off I turn it on and the grinding noise sounded like ...

grinding noise. I checked the belt and although it's still intact I can see where it was burning. I turned it on without the belt and the motor ran without any noise. I turned the pulley for the water

grinding sounds and smells of burning remove belt ..just lean back try turning pump by hand there is a metal shield on bearings it will sometimes drop down between pulley and metal frame causing noise

...washer 4.0 cu feet, and now it makes a squealing/grinding noise when I start it. Along with a burning smell. Where do I start checking? Thanks! has bad tub bearing, start checking for another ...

...IF A BEARING GOES BAD YOU CAN HEAR A SQUEAKING NOISE OR SOME TYPE OF METAL GRINDING NOISE IF YOU DID'NT HEAR ANYTHING THEN CHANCES ARE YOUR BEARING IS GOOD AND ITS JUST THAT THE BELT WAS WORN ...

...grinding noise during spin cycle and it smells like burnt rubbert The grinding you hear is from the drain pump. I have replaced around 60 this year alone. There is a insert that works its way down ...

...grinding noise, burning smell. How to diagnose and fix Draining problem; About the noise. If stumbles on the wash cycle and no noise occurs, is transmission problem. If the noise is present all the ...

grinding noise when it spins until again the NEW motor starts to smell and burn out again. I wouldn't buy another motor. This sounds like maybe something is caught in the pump putting an extra load on