...plug on it, remove back of dryer, undo screws on old cable one at a time and install new wire: example---remove a red wire from old cable and then put on the new red wire , move to the next color and ...
how to reverse door on maytag mde2301ayw This is simple, open the dryer door. There are 2 hinges, remove these from the door and the dryer. On the opposite side there are plugs, remove these and push ...
...plug is too large for hole. Can you remove the power cord from back of unit? yes, but they are normally fixed inside with crimped connectors. Easier to make the hole bigger and put a plastic cable ...
...they are not stopped up. Is the lagre hose in the back plugged up? is the vent cap restricted? remove the large hose and see if it is plugged inside the hose, if it has any kinks in it you would ...
...plug in a light to check for power. If Electric model, then you will have to check the power outlet the dryer plugs into. Remove the cover, and check for 230 volts across the end plugs, and 120 volts ...
...remove rear panel to gain access you will see motor looks like auto alternator? and is secured with bolt/s nuts and also has adjuster for belt tension as auto the power lead to motor is master plug ...
...opposite side of the cabinet. To change the direction of the door opening: 1. Open the dryer door. Remove the four hinge hole plugs from the left side of the door opening. Place nearby for future ...
...plug and remove the 2 screws. Be careful to hold onto the assembly as removing the last screw so it does not fall. Replace the glow plug being very careful to keep your fingers off the ...
need to put a new belt on how do i get to it. Not a fun job. Remove the screws in the top rear of the dryer. Lift the top and remove any plugs. Lift up and forward to remove top. Pull up and remove ...
2,008 questions posted
Usually answered in minutes!
867 Questions
815 Questions
489 Questions
196 Questions
146 Questions
