Maytag MDB9600A Jetclean II Built-in Dishwasher "water jets spinning" Questions

Ad

Question about Maytag Dishwashers

1 Answer

maytag jet clean model#dwc7400aaw top sprayer doesnt spin nor does it get water through it and bottom sprayer doesnt spin and looks like its not adequate water pressure Check to see in you have enough

Ad

...still not rotating. Any suggestions at getting it moving again? does water emerge from the jets if yes than maybe somthing broke such as a propeller that cause dit to spin under water supply

Ad

Question about Dishwashers

1 Answer

...water and all lights work but doesn't spin the three jet bars so it doesn't wash the dishes. How do I fix this? Could be a defective internal clutch that engages the jets and spin performance. Do not ...

Question about Neff Dishwashers

1 Answer

...water is coming out of the jets in the spray arms. if so, remove spray arms and clean. fault may be caused by debris in the end jets which being at an angle are used to turn the arms by the water ...

Question about Bosch Dishwashers

1 Answer

...that makes those spinners go around? the spray arms are rotated by water coming out of angled jets, this water being forced round by the main circulating pump. suspect it may a fault with this ...

...jets are clear and water does come from outlet but arm will not spin ? see this causes: Water-heating cycle the water must be preheater, see the heating elements faulty see the video. Timer clean the ...

Question about Neff Dishwashers

1 Answer

...and they appear to be free. could it be low water pressure? Chris these arms rotate only by water jetting out of angled jets at the end. it is likely that these jets are blocked - not always ...

Question about Tricity Bendix Dishwashers

1 Answer

...turns only by water spraying out of the angled jets at the end of the arm. take arm off, run water thro the centre hole and this is udually enough to force the debris to the jets. clean out and ...

Question about Kenmore Dishwashers

2 Answers

...jets at the trailing end of the arms are not blocked with food particles and other solid matter. This often happens and the arm is unable to turn because the water jet that is supposed to drive the ...

Question about Kenmore Dishwashers

1 Answer

...water that circulates is being pushed up through the center hole or tower. The angles of the holes cause them to be little jets when the water rushes out. No water getting through = no jet = no

Not finding what you are looking for?
Maytag MDB9600A Jetclean II Built-in Dishwasher Logo

214 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Bade

Level 3 Expert

1818 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...