WYSE Winterm S30 Network Terminal "setting" Questions

Wyse S30 power settings Hi I have a Wyse Terminal S30 connected to a touch screen. After 30 minutes the terminal goes to sleep and cannot be woken by the touch screen. All the power settings are set ...

wyse 1200LE - error - out of frequency Hi all, i recently plugged my wyse 1200Le thin client and this error came - OUT of Frequency. what could cause this problem? The display settings are not valid ...

WYSE S30 RESOLUTION SETTING TO HIGH i have a problem with a wyse s30 terminal, a user has set the resolution to high and we no longer have a monitor with high enough resolution to change it back, how ...

...what could cause this problem? Is there a way to reset the Wyse S10 terminal back to it's factory settings without setting up another "parallel unit" and trying to duplicate the keystrokes on the ...

hardware reset Hi there please could anyone help me out, I have the wyse s30 and the screen refresh rate was set way too high for the screen, I was told to do a hardware reset to system defaults but ...

Problem with WYSE Winterm 3235LE it displays Over frequency problem, unable to go further. Tsaukpaetra is correct it's a resolution mis-match with the monitor you are using. If you have Rshadow loaded

bios password is there any way of finding/resetting bios password on these boxes? You should be able to re set passwords in the bios by putting jumper on JBAT 1 terminal from pins 1&2 to pins 2&3 for ...

...message at the bottom right of IE on my WYSE S30. Dont know how to resolve/bypass this Check the IP settings of the unit, IP address, gateway, and DNS... like alwayse start by setting it to DHCP or ...

Display problems A brand new Wyse S30 is now displaying black patches on the monitor. A reboot will temporially resolve this. There is a hotfix you can download from the WYSE Website but you have to ...

i have some problem with my monitor frequency and wyse terminal frequency.Its overrange, i can't see anything when i power it up.Can smbd tell me how to reset factory default with power on. This is ...