Xerox XA7-192i 19" LCD Monitor "remains white computer shut" Questions

...white screen, vertical colored lines, then shuts off. I can't access the menu or get anything to come up on the screen at all before it shuts off. Hi, Try this :-- Try connecting your monitor to ...

Shut down/restart) and the screen came up bright white. I powered down and restarted - again the screen came up bright white. I powered down and turned the monitor off. I restarted the next day - when

...remains blank for some time. Eventually (after 10 or 15 mins) it displays like a sheet of white paper. Powering off and on at this point, the screen reveals a weak image of what should be appearing ...

...White vertical stripe I left my computer running for a few hours while I was gone. When I returned, the right half of the screen had turned into vertical stripes of all the colors of my desktop ...

...white got reddish,i disconnected the monitor checked the cables,there was no bent pin,then turned off and restarted the computer still all colurs were pinkish,i thought may be there was some problem ...

remains white even when i disconnect all DVI and Analog inputs - just filicker to black. It flickers to black 1-2 times also when i change Sourse modes (Digital/Analog) from the screen buttons but the

...remains on. If I shut it off and and restart it, it will flash to the desktop and then go black again. I have hooked up another monitor and it works fine so the issue is with the monitor. How do I ...

...remains green. if i switch off the monitor and switch it on again the display comes and vanishes with in two seconds. The green power light indicates that the monitor is receiving from the computer ...

white then black lines that go vertically up and down my monitor an inch apart. Sometimes on certain backgrounds it flickers like in the shape of rectangles and squares. Sometimes after ive been on it

white wire is positive and the black wire is negative. Don't worry about those four pins on the plug. If you look on the case of the old brick, you'll see that the pinout is quite simple - 1 and 2 are