Alpine PDX-1.1000 1000W x 1 Car Amplifier Car Audio Amplifier "factor audio" Questions

Audio Amplifier from a friend but I can't find out online how much this amp is worth or Peak power. Specs: 370x2 RMS@ 4 ohm STEREO (the AMP DOES NOT BRIDGE) CLASS A/B (also do not run it 2 ohms unless

...i would try to keep everything matching for best clarity and product life...i wouldpersonally suggest alpine car audio...or if cost is a factor try to go with a pioneed amplifier and subwoofer

kenwood kac-7204 1000w amp with 12 in sub what size wires nedded to use bigger the better my friend. Look at your Peak RMS output, and how long of wire you need. Then you could make the judgment call ...

...audio is the number1 factor of heat/thermal problem & fire. When an amp looses voltage, heat builds up inside it. Too much heat will make the amp be on "protect mode", excessive voltage drop will ...

sub hook ups im assuming that if my car fits a rockford fosgate amp then the rockford fosgate subs would be able to be hooked up as well? There's a lot more factors involved than that. Power ...

...and rear): 5 Hz-30 KHz (+0, -1dB) Frequency Response (sub channel): 5 Hz-500 Hz (+0, -1dB) Damping Factor (front and rear): >200 @ 4 ohm/50 Hz Damping Factor (sub channel): >500 @ 4 ohm/50 Hz ...

djust how do i adjust the 400 watt amp in my car so i can get better sounding bass alot of times its not just the amp that gives you better sounding bass.. A lot has a to do with a few other factors ...

...wires. Poor grounding for your head unit could be the problem. Also it depends on numerous other factors such as if you are running an amp, you may be pulling too much power for the power wires to ...

...turn off and back on what could be the i have the amp wit 2 12 kickers cvrs there could b allot of factors involving this problem first could and most important is to make sure theres no loose ...

...audio F2500D amplifier? Power Output RMS @ 4 Ohm: 700W x 1 Ch. RMS @ 2 Ohm: 1300W x 1 Ch. RMS @ 1 Ohm: 2500W x 1 Ch. RMS @ 1 Ohm: 4000W x 1 Ch @18v Signal to Noise Ratio: >100dB THD (IHF-A): 0.2% ...