Singer 7462 Mechanical Sewing Machine "5525" Questions

sINGER SEWING MACHINE MANUAL MODEL 5525 SINGER SEWING MACHINE MODEL 5525 INSTRUCTION MANUAL You may download a copy of the manual at http://www.singerco.com/uploads/download/694_5505-5525.pdf

treading diagram for model 5525 model 5525 the question is under the singer catagorysinger has a free manual to download in pdfGo to the singer websiteGo to the home pageGo to customer service--click ...

I have a singer sewing machine 5525 it will not sew The bobbin thread does not catch the top thread try changing the needle rethread the machine top and bobbin make sure the bobbin is inserted ...

Singer 5525. I replaced the belt but the needle is moving very slowly. I have oiled everything that is a moving part. Is it the motor, possibly? The belt could be too tight and is pulling on the motor

can I sew buttonholes on a 5525? If your machine has a straight-stitch and zig-zag function, you can always sew buttonholes. It would be helpful if your machine has the ability to set the needle ...

im pretty sure i have my singer 5525 threaded right but i think the bobbin is wrong but when i try to sew the top looks fine but the bottom is a thread mess an the thread keeps breaking angle the ...

how do you assemble the shuttle hook on singer 5525 sewing machine. Go to the singer website Go to the home page At the bottom of the page look for instruction manual--click on it It will take you to ...

My Singer 5525 bobbin winder won't turn. I'm not sure if I'm doing something wrong or if it just doesn't work. Either the winder rubber has worn down one side, or there is some residue on the winder ...

singer 5525 sewing machine knots up thread on underside of fabric after three stitches most commonly this is from incorrect threading top thread. Check manual for threading path or follow threading ...

singer 5525 model just roars When the pedal is presses, the machine just roars . I can turn the wheel by hand for one or two stitches but then it just stalls and roars again. I have had this machine ...