LG TROMM WM2688H 4.0 cu.ft. Front Loading SteamWasher "drum dryer problems" Questions

...drum is coming in contact with the dryer's frame. You can do that by manually rotating the drum. Some drums do not have bearings at the front but are silenced as they turn by hard plastic strips ...

...if that is the problem can I paint the drum myself.... if that mark is comming from the dryer .the drum has a rust. and you cant paint it or the seal of the drum is bad that seal is around the

...drum. If this is an dryer that is light (meaning not very heavy) you can observe the drum from the bottom. If you have the "exploded view" of your dryer you may be able to intuitively guess at the ...

...dryer drum. While Im drying cloths, the drum seems to be loose and wabbley. If I load it with too many cloths the problem gets worse. I can only fill the dryer with half the amount of cloths. Every ...

...dryer causing the drum to deform? Have spoken to store where purchased, & they stated for us to research the problem to see if it may be a manufacturing defect of some sort. If so found, they may ...

...drum and the rear of the dryer interior. When the rollers wear out, you need to replace the whole set. Rear seal Your dryer may have a felt-like seal at the rear of the drum. If this seal is worn, ...

...drum and the rear of the dryer interior. When the rollers wear out, you need to replace the whole set. Rear seal Your dryer may have a felt-like seal at the rear of the drum. If this seal is worn, ...

...dryer. Drum makes thud noise about once every revolution. I know that the belt has one worn spot, could this be the problem? ALWAYS UNPLUG YOUR DRYER BEFORE STARTING ANY REPAIRS Your problem sounds ...

...dryer drum is stiff when moving with a hand? Belt has jammed or drum has slipped out off drum guides When you spin the drum by hand, it will be stiff because you're turning the motor also. The drum ...

...drum. dryer ok otherwise ALWAYS UNPLUG YOUR DRYER BEFORE STARTING ANY REPAIRS Your problem sounds like drum rollers have flat spots on them or in need of lubrication. If you have a front loading ...