20 Most Recent LG WM1814CW Front Load Washer Questions & Answers

For "ue" an unbalanced load is sensed three times, re-adjust your load in the machine.

For e1, it could be a water sensor problem. Check to see if the inlet valve is okay and not clogged, water shd be in good pressure. If this is okay, open up behind after taking the plug off the wall. There is a thin tube coming from the switch area to the outlet pump area; disconnect this from the top carefully and blow into it, it should be free; if it is clogged you will hav a water level problem. Unblock and refit carefully.

LG WM1814CW... • Answered on Sep 10, 2020

if the bearings are rusted or seized u need to change main seal near bearings. was it noisy b4 you looked at bearings?could be broken spider that holds bowl.please reply if u need more help

LG WM1814CW... • Answered on Jun 29, 2018

Suds are not supposed to leak from the top; means you are not using the right detergent. Use front loading powders. You can open up the top during next wash to locate where the leak is coming from (after changing powder). I understand suds appear in the window during spin....but leak? Caution when machine works with top open!

rate if helped pl........

LG WM1814CW... • Answered on Jan 09, 2018

please call a local engineer as we don't know what type of machine your telling us about eric

LG WM1814CW... • Answered on Dec 29, 2017

hi Shellinator7. check the small drain hose on the side of the pump that is clogged, then that is not a failure that will significantly affect the normal operation of the washer. If your washer is not draining okay and you don't mind catching some water that spills out of that pump filter area when you open it up, then you don't necessarily need to remove that front panel and bother with unclogging that small drain hose. If the large hose between the tub and the pump or the discharge hose between the pump and the house drain behind the washer is clogged, then you may need to open up that cabinet. you could also check out this link and read up some more on this. LG Tromm front load washer not draining in the spin cycle Google Search

LG WM1814CW... • Answered on Dec 14, 2017

this is what i just found on the internet... With any washing machine, it is vital to ensure that the load is evenly balanced when using a spin cycle. Redistribute washing by adding or removing items to ensure a more balanced load. ... If the door remains locked and the machine is displaying UE error, please run a drain program.5 Jul 2016

My Samsung washing machine is showing a UE code during a spin ...

or try this link.. Error code UE on LG Front Loading Washing Maching Google Search

LG WM1814CW... • Answered on Oct 27, 2017

Open the little trap door on bottom front of unit. Unscrew lint filter trap. Drain water first with small tube.

LG WM1814CW... • Answered on Sep 10, 2017

Is your LG wash machine on warranty?

LG WM1814CW... • Answered on Jul 10, 2017

Most likely the motor position sensor also known as the hall sensor. Pretty easy fix. Part is under $20. Check out self help videos at repairclinic.com or appliancepartspros.com.

LG WM1814CW... • Answered on May 21, 2017

john low temperatures washing can cause the machine to smell if it was me i would set the machine to it's hottest wash and use a descaller or bleach and washing liquid ,after wash has finished give it an extra rince cycle./ scrum around rubber seal behind door before starting wash. check pump filter is clean,

LG WM1814CW... • Answered on Sep 24, 2016

Seen This before Main control board fixed it It would go through most of the wash cycle and just quit no errors but PF

LG WM1814CW... • Answered on Mar 25, 2016

If there is a back panel on the machine you can access it from there, if it has a enclosed back then you will have to lean the machine backwards against the wall to get underneath to access it. The pump has two wires attached to it make sure the power is off & lead removed from wall before you unplug them otherwise you get zapped. The drain pump is held into the pump casing/housing by three Phillips head screws. Undo the screws remove old pump and replace with new pump, make sure rubber seal is on the new pump before installing. You will need a torch & a Phillips head screw driver.

LG WM1814CW... • Answered on Sep 30, 2015

if when this happens does it work it you then put it on spin and drain only?

LG WM1814CW... • Answered on Sep 06, 2015

check pump filter, that little door on bottom left of front. otherwise bad pump

LG WM1814CW... • Answered on Sep 04, 2015

Not finding what you are looking for?
LG WM1814CW Front Load Washer Logo

584 questions posted

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1482 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular


  • WM LG

Most Popular Question

put in machine tub clean cycle

  • Washing Machines