Bissell SpotBot Robotic Wet/Dry Vacuum "dirty tank replacement" Questions

Ad

Question about Bissell Vacuums

1 Answer

tank. Rinse the Dirty/Collection tank with warm water. Replace cap and turn approximately 1/4 turn clockwise, until snug. Slide the Dirty/Collection Tank into the unit. Replace the Clean/Solution Tank

Ad

Question about Vacuums

1 Answer

tank. Dirty/Collection tank latch is not down. Push latch down, securely into place. Black Valve on the Dirty/Collection Tank is missing. Replace Black Valve into Dirty/ Collection tank. Usually there

Ad

Question about Hoover Vacuums

1 Answer

...dirty water tank is full and needs to be emptied. If the float is popping up and the dirty water tank is empty or not full this is an indication that the dirty water tank filter is dirty and needs to ...

Question about Vacuums

1 Answer

...dirty water tank if there is little or no suction. Turn off the Dirt Devil and grab the top of the dirty water tank. Push on the latch to release the tank and pull the tank off the base. Remove the ...

Question about Hoover Vacuums

1 Answer

...dirty water tank valve closes before the tank is full, sometimes even when its still almost empty. in most cases you will need to replace the dirty water tank assy. this is usually around $40 to

...dirty water tank. 2. Clear the filter screen of any dirt or debris. 3. Turn the cleaner on, check your motor suction by the filter screen. 4.. Replace the dirty water tank making sure it is flush to ...

Question about iRobot Vacuums

13 Answers

...Dirty Tank, refill with water, and slosh it around to pick up any sediment. Empty the Dirty Tank again. 6. Refill Scooba?s Clean Tank with water, adding a pinch or two of table salt. Run the Scooba. ...

Question about Hoover Vacuums

1 Answer

...dirty water tank, replaced it and then started to clean again. It did not **** up the water. The only reason for no pick up is an air leak. The most likely problem is that the lid is not properly ...

Question about Hoover Vacuums

1 Answer

...dirty water tank is in place. Also the handle must be released and tipped back. It is also possible that the rubber seal that the lower tank sits on is missing. If you look down into the motor area, ...

...dirty tank that if blocked will prevent water pick-up. To resolve and clear this condition will require several processes to occur at once. Fill the dirty tank half way with hot water, add Scooba cup ...

Not finding what you are looking for?
Bissell SpotBot Robotic Wet/Dry Vacuum Logo

140 questions posted

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...