...need to both e replaced for about 10.00 each at electronix.com you will also need some heat sink compound available at Radio
Question about Samsung Televison & Video
...compound to them and simply install them... Be careful not to over heat the pins and don't be in any hurry.Now test the two 3.5a pico fuses and replace if necessary, as well as the 3.9 ohm resistors ...
...words but our Akai TV started to have the red and blue colors overlap kind of like its in 3D also the picture seems to wave on the bottom and the top. From what I have read on the forums people with ...
...words are split by colors. Colors not converging. Performed alignment procedure and does not work to bring colors together. This problem originally started out as a sparatic problem and over a short ...
...words, yet this is the best way to discribe the problem. If you try to adjust convergence with the flash focus, perfect focus, (depending on the make of your set) or by manual convergence and the ...
words or picture scrolls by IF IT IS 53UWX10B: This model uses two convergence IC's----if 3 D one or both are bad. Most of the time this set uses either two of the STK-392-110 OR THE STK-392-150 CHIPS
...words and is leaving blury outlines around people If you try to adjust convergence with the flash focus, perfect focus, (depending on the make of your set) or by manual convergence and the lines will ...
...tubes. #3 Deflection drive electronics: A CRT works by using an electron beam to excite fluorescent compounds on the face of the CRT. To move the electron beam about, a process called deflection is ...
193 questions posted
Usually answered in minutes!
255 Questions
269 Questions
227 Questions
221 Questions
201 Questions