20 Most Recent Akai LCT2715 27 in. LCD Television Questions & Answers


On my Akai LCT2715---- Ok, I had the same problem with locating USER MODE (even called Akai service HELP and that person didn't know anything)!!! even tho we looked through manual just got TV back from putting $184 in Capacitors repair (PUT IN NEW NICHICON CAPACITORS) from the standby button not woking just flashing from the Power Supply gone bad plus 2 main capacitors other than power supply that were bad. Works great now. For the USER MODE look on the remote in the bottom black area repeatedly push the P.MODE. You should have full function to adjust all in menu list WE DID.

Akai LCT2715 27... • Answered on Dec 25, 2019


I have the same problem. My Akai 27" flat screen shuts off inconsistantly. Sometimes it will stay on for hours and then we have to turn in on every 2 minutes. It seems to be getting worse. Is there anyone who has found a way to fix this?

Akai LCT2715 27... • Answered on Dec 20, 2014


sounds like power board at fault stuck in stand by look see if you can see any bulging caps

Akai LCT2715 27... • Answered on Mar 16, 2014


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given.

Akai LCT2715 27... • Answered on Mar 16, 2014


Be sure AC power cord making very good connection; then,possibly capacitors in power supply PCB, also possibly Main PCB;

Akai LCT2715 27... • Answered on Nov 30, 2013


I bought one of these tv's at a thrift store and it had the same problem, orange light blinking and static sound coming out of the speakers, no video at all.
The problem was the power supply board, this power supply has multiple outputs that feed the circuitry, 12V, 24v, 5V.
There was nine electrolitic capacitors I had to replace to fix it, all of them were bulged they are easy to spot, I measure one of them that was supposed to measure 1000uF but measured only 65uF. you can buy these from digikey for about 50 cents each, they need to be rated at 105 deg c and the profile has to be below the heat sink otherwise they will hit the top of the heat sink, the spacing between the leads has to be 5mm so they fit in the pcb. I replaced 3 1000uF/25v, 3 470uF/16v and 3 1000uF/16v and that fixed the problem, I bought this tv broken for 100 bucks fixed it with 6 bucks.
Good luck, don't perform repair if you are not familiar with dangerous AC voltage inside the TV.

Akai LCT2715 27... • Answered on Sep 02, 2013


I can help you with your Akai LCD TV & DirecTV remote control.

This is a list of all the Akai LCD TV control codes for DIrecTV remote controls:

11675, 11676, 11688, 11689, 11692, 11693, & 11935.

Complete instructions on entering DirecTV remote control codes are here.

I hope that helps.
_________________________________________
DirecTV Remote Control Code List Download
DirecTV Remote Control Manual Download
DirecTV Remote Control Code Entry
DirecTV Remote Control Code Search
DirecTV Remote Control Onscreen Setup

Akai LCT2715 27... • Answered on Mar 13, 2013


try unplugging your t.v for 10-20 seconds. plug it back in. if your power light continues to flash your t.v is the issue. you should be able to google your issue or check your owners manual about the problem. unplugging the t.v is the last ditch effort. Good Luck!

Akai LCT2715 27... • Answered on Feb 19, 2013


Are you trying to watch tv or use it for the computer? The input or source selection is on VGA at the moment which is the 15 pin input at the rear and it is expecting your computer to be attached. If you are using it with your computer you need to set the resolution on the computer to match the monitor, if you are not then switch the input to TV or whatever you have connected.
If you want to watch cable then switch the input through all the choices until you see a picture. Make sure the cable box is plugged in and powered on. The source or input button is below the number 9 on the remote, SOURCE: Press to select the signal
source, such as TV, AV, S-Video,
Component 1, Component 2 or VGA.

If you don't have a manual to tell you how to switch inputs you should find one here:
http://www.retrevo.com/d/df/LCT2715.pdf?doc=6c86396a98e4090a2ceb3bbb2052f498&ts=1296001090219&rk=0.035132213070726115
if link does not work go to http://www.retrevo.com and search for it

Akai LCT2715 27... • Answered on Jan 03, 2013

Not finding what you are looking for?
Akai LCT2715 27 in. LCD Television Logo

325 questions posted

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76637 Answers

Cindy Wells

Level 3 Expert

6281 Answers

Paul Bade

Level 3 Expert

1688 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Akai Televison & Video

  • Akai Televison & Video

Most Popular Question

akai television turn

  • Televison & Video
Loading...