Hoover U6630-900 WindTunnel Bagless Upright Vacuum "center drive brush" Questions

...several times in the direction of motor pulley. If installed properly, drive belt will center itself on rotating brush. Reposition brush cover and screw back into place. I hope that this helps

...Looking at the end of the brush, opposite the drive belt, the bearing-type end that the brush spins on appears to be off-centered. Is there an easy way to fix this??? Replace the brush roll and

Drive Belt will center itself on Rotating Brush. Reposition Brush Cover and snap back into place. Check to be sure all three latches are secured. When you turn on the vacuum, do you see the motor that

...Belt is gray in color, replace belt around the drive pulley and also around the brush bar, align the bar and push back into place, rotate until the belt is centered and reinstall plate and

...center, suggested the belt might have broken, can not ifnd replacement info or how to repace on owner's manual. if is possible there is not belt that drives the brush? There is no belt, the brush ...

center of the brushs is not turning. Can you help me. You are on the right track! Place a screwdriver (flatbladed) into the white drive square and try to turn it. If it is locked up the drive assembly

Brush drive gear Is there a replacement part available? Hi Ivan. I'm sorry you're experiencing difficulty with the drive gear. You may want to contact one of our Authorized Service Centers for ...

...drive set the screws and the brush cover aside. - pull brush straight out and you will see the gray rubber band. -replace the new drive belt over the motor pulley and the floor brush. -replace the ...

...drive system. Note: The brush will not rotate when the machine is locked in the upright position, because an internal micro-switch turns the brush motor off. - Check the belt through the clear brush ...

...center spin brush won't stay in why? Hoover SteamVac brushes not spinning This video might help ... it is a related model. The usual problem with these brushes is that they stop spinning ... not that ...