vacuum shuts off after about 10 to 15 minutes after resting for about 5 or 10 minutes it will go again for about 15 minuutes. I have cleaned it , doesn't help there is a moving part, like a bearing ...
Question about Rainbow Vacuums
...that the bearings have seized or shot, then likely the bristles are worn well beyond useful. ...
bearings on the end of the roller have seized and melted the plastic end. I was wondering if you know where I can find replacement bearings and a new plastic end cap. Here are a couple of links: http:
Question about Vacuums
...not seized up. If it turns but very hard to turn, you probably have hair inside the bearings. Turn vacuum cleaner over and clean it out. Once hair gets inside the bearings it may impossible to
...check the bearings in the brush bar are free and spin without the belt on.If you cant spin the brush bar by hand with the belt not attached then your bearings are seized.Get a new brush ...
My vaccuum keeps eating belts Beater bar is seizing up and needs stripping down and cleaning Plus the bearings on the ends need lubricating
...seized up. How to unclog bearings? I have a 8 year old kenmore progressive 25512 model with seized up beater bar. One end was easily unclogged, the other, however is really stuck. How does one go ...
suction/odor My bag burst inside the machine. After cleaning, replacing the bag, cleaning the beater bar & replacing, checking the belt, and checking the hoses for clogs, the machine still has weak to
Hoover SpinScrub 50 wheels won't spin The bearings in the turbine are prone to seizing because of moisture. Take it to your local vacuum repair shop and have them repair it. At my shop we re-grease ...
...the strings, hair, etc. as Gary Brooks indicated. And if it still doesn't turn easily, the bearings could be seized or worn out which would mean a replacement is needed if a shot of oil doesn't
1,019 questions posted
Usually answered in minutes!
388 Questions
262 Questions
179 Questions
146 Questions
