Reddy R60A Utility Heater "replace head gasket" Questions

...blown head gasket. You would need a new head gasket and some tools especially a torque wrench. When removing the head gasket make sure you mark the belt and put it back in the same position.

...replace. The heater has nothing to do with the AC other than they share fan and duct work. Also check your exhaust, is it thicker smoke than normal? Is it heavy white in color? Does it sort of have a ...

replace the entire zone valve? The motor was replaced last year because I wasn't getting any heat on that zone. Thank you. Steve Hello,Steve they have replacement power head for that valve,but you can

...dip stick. If the oil on the stick looks milky, that's here the oil is going, due to a blown head gasket. However, on the minor problem side, check your radiator cap. It may need to be

...head screws on the end of the pump. You will need a pie pan to catch the oil and some thin gasket material to replace the oil seal between the end cap and oil pump. At this point you are on your way ...

...head) These are very fragile so be VERY carefull. There are three filters in this. One is removeable from the outside before anythis is disassembled. It is like a sponge and must be cleaned on a ...