...set it back down also check the load that is in the machine to make sure it is not all on one side or the heavy stuff is not towards one side or overloaded next if the transmission coupling is ...
washer overfilling on oversize setting Is it the fill setting switch? Most likely it is the clear rubber hose that connects to that switch. IF you pop the top up you can llok and make sure it has not ...
...OK. Once you have the back part of the washer leveled side to side in the back and while it is in the final location of your laundry roomm check the front to back level. Use one adjustment leg on the ...
...set if they look glazed or shiny on the sides even though the belts may look OK otherwise. Belts on other brands will be more obviously bad. Here's how to replace the belt on older Whirlpool/Kenmore ...
...set the water level ( small - medium - large ). The water level control is responsible to shut off the power to the fill valve and direct that power to the timer so the washing machine can start up. ...
Question about Maytag Washing Machines
...ok. When I turn the belt underneath counter clockwise the moter thing turns clockwise. When I turn the belt clockwise nothing happens. I havent been able to see the moter thing go counter clockwise. ...
...set the washer on the regular cycle and turn it on to start filling. Use a drop light and check all the hoses under the washer as the washer is filling. Make sure to keep your hands away from any ...
...Set it down and use a putty knife and feel along the first two inches left and right where top meets the front panel. You find two catches that when depressed will allow access to the top underside. ...
...Set your multimeter to the R x 1 setting. Touch each of the meter's probes to one terminal each. Your motor should show little resistance (a reading of zero, or close to zero). Now check the ground ...
...Maytag Neptune TL runs fine empty, but with a load of laundry, the machine quits during the spin cycle. There is a clunk and bang, then a code "cd" apears on the display. I took the unit apart and ...
315 questions posted
Usually answered in minutes!
129 Questions
64 Questions
55 Questions
59 Questions
47 Questions