Roper RES7646KQ Electric Dryer "buzzing starting" Questions

...LE5700XK or the LG5701XK, not sure which) and when I hit the start button there was a loud buzzing noise, but no start. I turned the dial to the off position, and then to the medium dry ...

...- Loud buzz when start button pushed and does not start. When start button is pushed there is a buzzing noise but dryer will not start. I have found that the switch activated by the door close or ...

BUZZING NOISE IT HAS POWER, NO MOVEMENT JUST A BUZZING NOISE, I CHECKED BELT AND IT LOOKS OK. Is this noise a motor buzzing noise? If motor has power but the start circuit is not energized, then the ...

when hitting start button, it sometimes buzzes, but fails to start. Can sometimes wait for a little while and try again, and it starts. When it buzzes, it will only buzz for a few seconds and then ...

Buzzing noise when pressing start button I tried to start the dryer today and when I pressed the start button, it buzzed like it was done drying. I played with all the controls and I cannot get it to ...

Dryer will not start when start button is pressed, makes a buzzing noise after using my dryer for two timed cycles. I went to restart it on 15min. and it wouldn't start and made a buzzing noise. I ...

...buzzing sound, but it won't run. Any ideas on how to fix this? try moving the drum by hand is it free? if it is try starting the dryer while spining the drum I have found that the switch activated by ...

Buzzing noise from dryer and wont start When I turn on my dryer it will just make a buzzing sound and wont start up? Hi, It sounds like your motor has gone bad....it will buzz really bad when it is ...

whirlpool dryer makes a buzzing sound whey start button is pushed. sometimes it will turn on for a few seconds but most of the time it just buzzes. The buzzing is probably the relay trying to start ...

...starting it, but it will start again. Is my timer supposed to buzz? Is it bad? Is the motor just overheating? I tried that trick of holding down the door switch, holding down the start button and ...