AOpen AX34-U Motherboard "onboard floppy drive" Questions

...F2 / Del key during startup. That should bring the bios setup. Now Restore that defaults & install OS on your HDD. If you are not using Floppy drive, disable the onboard floppy controller from

...onboard speaker began singing to me while it announced I had a floppy drive error (I don't have a floppy drive--the boot sequence had defaulted to its original settings). I got a blue screen when I ...

...onboard. Then, detect and initialize the video adapter BIOS Sign On - This will start showing information about logo, processor brand name, etc Testing Base and Extended Memory - Testing base memory ...

...drive make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they are probably old and faulty ? hope this ...

floppy drive cable in the reverse way. just change the cable to the right way and check it out or change the fdd cable 1- Turn off the computer and unplug the power cord. 2- remove the onboard battery

floppy cable is plugged correctly). I want to think it may be the motherboard or processor. Any other ideas? have you also tried different video cards? or the onboard built into your motherboard? Your

...onboard controller is defective. Return to Asus for replacement/repair. Mike dear mike, I too face the same problem, here the window xp cdrom did not detect sata drive. but the bios detect sata and ...

...floppy drive. dvd rom and also cmos battery, problem remain the same. The fact that the board is making a long beep is usually a sign of a memory problem. This may be the RAM has failed (try with one ...

...FLOPPY BOOT DISK 3-UNPLUG VIDEO CARD AND ALL CARD ON YOUR MOTHERBOARD.. TEST ONLY WITH THE FLOPPY DISK AND ONBOARD VGA.. OR GOOD TESTED VGA CARD. EXCUSE MY BAD ENGLISH. CO3OV CUBA ...

...onboard ram DVD Drive LG dual Layer 16x Intel Dual Core Extreme 2.8 ghz Ok so this computer has run fine, however recently I switched cases and decided to swap over to XP SP3 with a clean install on ...