Dyson DC07 Bagless Upright Cyclonic Vacuum "hose work position" Questions

...hose to a different position when you pull out the wand. On your machine, this hose may be stuck in that different position (so it will **** only through the wand). It should flick back to the other ...

...position it works fine. Can't find anything in the manual or on the net to solve problem. Any ideas?? Hi. You will have A blockage in either the wand or hose, completely remove them from machine the ...

...hose in the upright position I have a Dyson DC04 which was working great until I emptied it last time. Now, there is suction coming from the hose while the vacuum is in the upright position, and it ...

...Hose for attachments has suction but floor vacuum doesn't work. When in the upright position, a lever closes a door in the suction line so that the hose can be disconnected and used with attachments. ...

...vacuum. (I lost my instruction book) Thanks If this unit has a suction hose built in to the handle, the carpet vacuum should start working after you return the handle hose to the proper

hose will work but many times it won't. Sometimes there will be suction for a few minutes and then it slowly fades until there is no suction for the hose. Thoughts? check the seal on the filter is not

...hose will not work at all (0 suction thru it). I've checked the hose and made sure there is no obstruction. Any ideas? Not sure if I can help, but I'll try. The DC17 has two motors: the vacuum motor ...

...position it works. When reclined it doesn't provide suction, and the brushes move nicely. When using the tools, hose etc., it works. Any idea. Well you did not provide make and model either. If a ...

...work when I use the hose? The motor thermostat needs to be reset Move the power button to the "On-Off" position. Unplug the vacuum.cleaner and then look or check for a clogged hose or filter and also ...

...filters the vacuum only came on when it was in a vacuume position. It's appears to be running at about 10 % suction the hose section does not work at all. You probably have something clogging the ...