Indesit WA 125 Front Load Washer "loud clunk noise end" Questions

loud clunking noise towards end of washing cycle. only 3 mos. old. people who bot from have been out 3 times and keep saying there is nothing wrong. and say is not belt driven anymore but gear driven.

...loud clunking noise drum in Frigidaire GLTF1240AS0 seems to have dropped back and down, causing it to clunk and not rotate properly. Seems to hit the bottom at certain points. Any help would be ...

...loud clunk sound. What is wrong with it Hi, Not knowing what model machine you have, I would hazard a guess and say it is your break solenoid or break arm or a variation on a break system. After the ...

...loud squeak, clunk, bang, or jet engine sound? If it is a loud jet engine sound, then your tumbler bearing is wearing out. You could try oiling it, but [probably you will have to replace it. It?s a ...

...loud clunking noise and turns the whole machine sideways. Any help would be greatly appreciated. Joe Hi, it sounds like maybe some dust has gotten in the basket drive pads causing it to stick. Has it ...

...loud clunk is normal especially in Simpson and Hoover top load machines. You can check this by putting the machine on a spin cycle. Once the machine gets up to speed, open the door. You will hear the ...

...loud noise--not clunking--just like it's working overtime but can't spin the wet clothes. Any suggestions? What happens is the direct drive coupling has probably failed. They wear out and usually a ...

...loud clunking noise? Hi from retired Englishman in SW France I mostly answer front load problems but ' out of balance' is a common problem with both! So- I don't know your particular machine but the ...

...loud clunking noise, repairman said its the motor. Someone else said it is common in these types. Is it worth fixing or just buy a new one? What do you think? Hi, I can't imagine that the repairman ...

...loud clunking noise and it vibrates during the final spin cycle. I know that this might be a brearing problem, so I want help and advice in getting to the bearing to replace it and about how much ...