Indesit Washing Machines - Recent Questions, Troubleshooting & Support


Manufacturers use their own codes and those can be different on different models. There is no industry standard.

Indesit Washing... | Answered on Nov 21, 2020


I have a maytag washer that when it fills with water it wont drain out..the spin cycle just makes a noise and it wont do anything..any ideas what i can do to fix it thanks

Indesit W 123... | Answered on Nov 20, 2020


Hi if your beko WMA 510 washing machine wont drain or has a spin problem then you have to check the carbon brushes first.

Also check all waste pipes are clear and inspect the pump I have included this video below.

At our website I am doing self diagnostic videos on these beko's as we speak so all tutorials will be in this link below
How to replace Beko Washing Machine Motor Carbon Brushes
you might find this test video helpful but only do it if you have checked the motor

Indesit W 123... | Answered on Oct 25, 2020


Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101

Indesit W 123... | Answered on Oct 14, 2020


hello have you checked the glass fuse inside the washer it will be on the power board

regards
shaun

Indesit W 123... | Answered on Jun 27, 2020


H20 means not filling with water properly.
Check hoses and that taps are fully turned on , make sure water pressure is o/k, no kinks in hoses

Indesit Washing... | Answered on Mar 27, 2020


The error code you are seeing means that the Pressure switch is stuck and it cant tell how full the washer is so the unit stops and flashes all lights to warn you. You need to have the pressure switch replaced.

Indesit Washing... | Answered on Mar 21, 2020


My indicit washing machine makes really loud noise when spinning and it is loose when l try to turn the drum by hand

What should I do please

Indesit Washing... | Answered on Feb 02, 2020


F06 - Door lock fault
Issue: Washing machine door cannot be opened or closed/when the door is closed the machine the programme will not start.
Advice: If your washing machine door will not close, please check for any obstructions in the door lock.
OR,
Switch off the device. Disconnect power. Wait about 3 minutes.
Open the door, then close. Reconnect device to the network.
Start device.

Cause: Door lock fails to close / open door lock triac open / closed,
frequency signal fault

Dado

Indesit Washing... | Answered on Jan 02, 2020


Lots of great replies, but I narrowed my "3 beeps" during wash to my daughter putting too much washing in the machine. It seems to have an 'overload' sensor that beeps when it detects too much weight. I initially thought it to be a blocked pump, but noticed it was beeping during washing cycle without the pump running. So worth trying a little less in the machine before you start taking things apart.

Indesit Washing... | Answered on Oct 21, 2019


F05 means pressure switch jammed on full.
Remove lower rear panel of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside hose.
Refit and test.
Please rate my solution.
Thankyou.

Indesit W 123... | Answered on Sep 26, 2019

Not finding what you are looking for?
Indesit Logo

2,156 questions posted

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Sheldon Dedek

Level 3 Expert

912 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...