20 Most Recent Indesit WA 125 Front Load Washer Questions & Answers

You might be able to pop the very top off the agitater,unscrew the nut and pull it up,your jewels will be under it.
Hope this helped.Let me know by rating me or
for more help go to live chat.Thanks
Len West

Indesit WA 125... | Answered on Jul 05, 2019

Not spinning is usually a broken belt/pulley.
You can check by taking off the top of the WM, usually just 4 screws on the side (sometimes hidden below white covers).


It could also be the (carbon) brushes that are worn down.


Check out this video or a similar one for your make of washing machine. If you're handy you can replace them yourself after checking IF they are worn down (usually they decrease in length, check against image of "new ones"). I get my spare parts from


How to replace washing machine carbon brushes on Bosch washer

Indesit WA 125... | Answered on May 18, 2015

there is many thing first check power if is ok then check his fuse

open his penal fuse and supple.

Indesit WA 125... | Answered on Jun 19, 2014

go to appliancerepair.com

Indesit WA 125... | Answered on Apr 12, 2014

F12 = communications error. one PCB is not speaking to the other.
Can be anything from bad connections to failure of the electronics.

Indesit WA 125... | Answered on Dec 09, 2013

Suggestion: Possible your outlet filter is blocked; this needs periodic cleaning, depending on your usage. Clean this out and re-fit. Refer to your users' manual re. where the filter is....

Indesit WA 125... | Answered on Nov 25, 2013

This video will show you how to keep your soap draw clear and how to service the parts
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Indesit WA 125... | Answered on Aug 05, 2013

Check the solenoid belongs to that tray.It may struck.

Indesit WA 125... | Answered on Jul 30, 2013

Take the top panel off by removing the two screws underneath the lid at the rear and look down inside towards the front door edge of the drum you will see a very large metal hose clips holds the door seal on. A screwdriver will loosen the clip then the clip will slip off and then the seal can be removed and replaced

Indesit WA 125... | Answered on Apr 07, 2013

What is the model number of your unit?

Indesit WA 125... | Answered on Nov 02, 2012

1) lock is defective or 2) the key is defective, see if some locksmith can make a new one. however you can bypass the lock key for to see if the machine will be RUN. Otherwise the problem is another place see the diagram attached. God bless you

Indesit WA 125... | Answered on Jun 21, 2012

Not finding what you are looking for?
Indesit WA 125 Front Load Washer Logo

148 questions posted

Ask a Question

Usually answered in minutes!

Top Indesit Washing Machines Experts


Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Sheldon Dedek

Level 3 Expert

912 Answers

Are you an Indesit Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Indesit Washing Machines

  • Indesit Washing Machines

Most Popular Question

fabric conditioner not going

  • Washing Machines