Linksys Wireless-G Range Expander (WRE54G) "power" Questions

No power light when plugged in Have you tried a new power supply, DLinks are unfortunatly renouned for power supply faults Ether it works.. or it doesn't.. check all cables. Try other outlets. If ...

...always searching and cannot seem to connect. We have not moved it or changed any systems. Give it a power cycle ... or factory default the thing and configure it up again. It's possible it took a ...

Problem The power light does not turn on when I plug it in to the wall. The powerline light does turn on though. I can not pick up any wireless signal. I tried resetting it but when I held it for 15 ...

No Power I have a Linksys Wireless-G Range Expander Model WRE54G which seems not to power on. When plugged the Link light comes on very dim and the Activity light doesn't come on at all. What could be

...I can still hear the Hiss from the unit if I put it close to my ear. First Check to see if the Power supply is actually putting out power, us a multimeter set to DC volts. If there is no, or an ...

...must hold it for about 10 seconds. Requires a "hard reset" which is accomplished by unplugging the power cord from the jack first, then hold in the reset button with a toothpick or other small

...to hard reset when can't access internal pages? There is a small reset "hole" on the repeater. With power ON, insert a stylus (straightened-out paperclip) into the reset hole and keep pressing for 30 ...

...or without wire Many thanks if you can help I also had this problem when the BTHomeHub goes down, power loss etc. I seem to have fixed the problem by changing the wireless config in the homehub to ...

...button and nothing happens. No lights. If there's no light on the device when you plug it on a power supply that is a clear indication that the unit has a hardware problem and better have it ...

No lights /appears to have no power wre54g expander Working fine until it was unplugged to move it . Didn't come back up. Can it be repaired, and if so , how? Kingsolmn, your solution is by far the ...