...subwoofer wiring before performing these tests). 2) If they test out good, hook the wires back up and test the terminals at the terminal cup or at the Amp hookup if you didn?t use a terminal, don't ...
Question about Kicker Car Audio & Video
...subwoofer. Any other combination will result in an impedence too low for your amplifier. Next: Using an OhmMeter (Digital multimeter set to Ohms 20) test each voicecoil against its advertised ...
...hook up the rca cord to the subwoofer rca connection on the back of the stereo unit-the other rca outputs are there in the event that you want to run a 2 or 4 channel amp to power the speakers that ...
...Hook your speakers to the left and right channels of the amp with the correct polarity (+) (-) . Set the cross over on the amp HP-AP-LP for what ever application you are using it for like subs or ...
...hook them up Hello cesar199064, These are the steps you required to install your amp and subs: 1) Purchase an amp wiring kit with 2 or 1/0 gauge power and ground wires. 2) Decide on a location to ...
2 days because my trunk latch broke. All i did was disconnect the subwoofer, power, grnd, the remote wire...(blue one) and the spkr wire that hooks to the sub...and i also disconnected the power cable
...hook up your remote turn-on wire to the head unit's wiring harness. Determine which RCA cables will go to each channel on your amp(s). I find it useful to have a 4-channel cable and an additional ...
...hook it directly to a known good source, if that fails, use the high inputs. the fix for mine was to disconnect the amp completely, open the case, and spray everything down heavily with CRC QD ...
44 questions posted
Usually answered in minutes!
481 Questions
126 Questions
44 Questions
26 Questions
6 Questions